A simple component/parts box holder for your Multiboard.

You also need 2 multiboard large bolts to screw it into a multihole.

In the pictures i used 13mm bolts with a push-fit head. 9mm would probably work as well.

There are two versions:

    Default shelf which has the same side-shelf dimensions as the original
    Large shelf which has slightly bigger side-shelves to support smaller boxes better

There is also a variant available with reinforced side walls.

Pictured is the default version, but in hindsight I probably should've gone with the large version.

Printed in white PLA+, 0.2mm layer height, 15% infill, 3 walls.

This is a remix of:
https://makerworld.com/en/models/419611


Component/small parts box holder for Multiboard 

multiboard-box-holder-default-shelf.stl

My first original design!

A simple multiboard holder for the Velleman soldering accessories/cleaning kit.

Printed with PLA+, 0.2mm layer height, 20% infill, 3 walls.

Supports are very necessary!

Multiboard holder for Velleman soldering accessories/cleaning kit 

multiboard-soldering-accessories-holder.stl

Remix of the ferm skadis combitool holder on makerworld by flo89.

You need 3 snaps to mount it to your multiboard.

Supports for the multiboard push fits are probably necessary, supports for the usb-c hole are optional.

Printed in white pla+, 0.2mm layer height, 2 walls, 15% infill.

Remix of: https://makerworld.com/en/models/476614

Ferm combitool holder/mount for multiboard

ferm-combitool-holder-multiboard.stl

A multiboard holder for CNCKitchen's heat insert tips and the pinecil/ts100 soldering tip.

Printed with white PLA, 0.2mm layer height, 20% infill, 2 walls.

Supports highly recommended for support the snap-fit.

Remix of: https://www.printables.com/model/839336-cnc-kitchen-threaded-insert-tips-holder-ap-2 by @Luis_164252 

CNCKitchen heat insert tips and pinecil/ts100 soldering tip holder for multiboard 

heat-insert-tip-holder.stl

Remix of the q6 nano holder for Ikea Skadis by Leif3D on Makerworld.
Replaced the skadis hooks with a multiboard push fit.

Printed in white PLA, 0.2mm layer height, 15% infill and 3 walls.
Rubber mallet helps getting it installed ;)

Remix of https://makerworld.com/en/models/453835

ISDT Q6 Nano Holder for Multiboard

q6-nano-multiboard.stl

Remix of the deburring tool holder by @PaulFirschin_1114995 to fit multiboard push holes as a push fit.

Printed in pla+, 0.2mm layer height, 3 walls, 20% infill.
Supports highly recommended for the middle and top variant!

Made 3 variants: 
- one with the peg in the middle (as pictured)
- one with the peg at the bottom
- one with the peg at the top

Logo didn't really come out nicely so i cut it off with a hobby knife. 
You might have better results with the logo if you print at 0.12mm and/or a smaller nozzle (picture is printed with a 0.4mm nozzle).

If anyone wants a model without the logo, let me know and i'll upload it.

Remix of: 
https://www.printables.com/model/694746/remixes

CNC Kitchen deburring tool multiboard holder

cnckitchen-deburring-tool-multiboard.middle.stl

Remix of the needle file holder by noxi to accommodate 6 files instead of 5.
Moved up the snap connector so that there is a bigger surface on the bed, should stick better.
Slightly fixed some geometry issues.

I needed 6 slots for my needle file set so i made this.

Printed in PLA+, 0.2 layer height, 15% infill, 3 walls.

To install you also need a regular multiboard snap.

Rubber hammer helps getting it installed ;)

**Update 20/07/2024:**
Added an alternative version that supports larger/thicker files up to 6mm thick.
The default is 4mm.

Remix of:
https://www.printables.com/model/816210-needle-file-holder-for-multiboard

6 slot needle file holder for multiboard 

file-holder-multiboard-6-slot.stl

file-holder-multiboard-6-slot-6mm.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Metalspoon

Achievements

Seedling

Voyager

Novice Maker

Debutant