This model is restricted by licensing terms.
View license.
Remix of the deburring tool holder by @PaulFirschin_1114995 to fit multiboard push holes as a push fit.
Printed in pla+, 0.2mm layer height, 3 walls, 20% infill. Supports highly recommended for the middle and top variant!
Made 3 variants:
- one with the peg in the middle (as pictured)
- one with the peg at the bottom
- one with the peg at the top
Logo didn't really come out nicely so i cut it off with a hobby knife. You might have better results with the logo if you print at 0.12mm and/or a smaller nozzle (picture is printed with a 0.4mm nozzle).
If anyone wants a model without the logo, let me know and i'll upload it.
Categories:
7 Likes26 DownloadsJuly 15, 2024
17 Likes26 DownloadsJuly 15, 2024
This model is restricted by licensing terms.
View license.