A simple component/parts box holder for your Multiboard.

You also need 2 multiboard large bolts to screw it into a multihole.

In the pictures i used 13mm bolts with a push-fit head. 9mm would probably work as well.

There are two versions:

Default shelf which has the same side-shelf dimensions as the original Large shelf which has slightly bigger side-shelves to support smaller boxes better

There is also a variant available with reinforced side walls.

Pictured is the default version, but in hindsight I probably should've gone with the large version.

Printed in white PLA+, 0.2mm layer height, 15% infill, 3 walls.

This is a remix of: https://makerworld.com/en/models/419611