A Japanese-inspired set designed to light your home: Haru and Riku Wall, inspired by traditional shoji screens, together with Tokyo in its solid version.

This set is designed for enthusiastic makers who enjoy printing models to assemble and like Japanese culture.

What's included • Haru, Riku and Tokyo lamps with our signature RippleMesh texture. • Bulks to print Haru and Riku joints all at once, respectively. • A step-by-step instruction file to help you replicate the result shown in the photos.

Model dimensions Based on print bed orientation.

HARU TABLE LAMP • Shade: X: 126.77 / Y: 126.77 / Z: 152.50 • Column: X: 20.15 / Y: 240.00 / Z: 20.15 • Beam Top: X: 20.15 / Y: 136.85 / Z: 20.15 • Beam Bottom: X: 136.85 / Y: 20.15 / Z: 20.15 • Pattern: X: 110.85 / Y: 161.40 / Z: 2.2

RIKU WALL LAMP • Shade: X: 123.71 / Y: 98.84 / Z: 209.40 • Column: X: 123.71 / Y: 98.84 / Z: 209.40 • Beam Short Bottom and Top: X: 20.15 / Y: 111.85 / Z: 20.15 • Beam Long Bottom and Top: X: 20.15 / Y: 136.85 / Z: 20.15

TOKYO TABLE LAMP • Shade: X: 243.87 / Y: 243.87 / Z: 131.40 • Base: X: 166.78 / Y: 166.78 / Z: 104.40 • Lid: X: 117.15 / Y: 117.15 / Z: 7.18

Recommended slicers • Bambu Studio or PrusaSlicer

What you'll need to print • 0.4 mm or 0.8 mm nozzle • PLA or PETG

What you'll need to assemble • E27 screw socket with two nuts/rings — see photos for reference. • We recommend watching the assembly video included in this listing.

Safety note • If you’re using PLA, the bulb must be a low-consumption LED. We also recommend this type of bulb if you’re using PETG. • Always turn off the power before any installation.

Related product Tokyo Classic | Riku Table Lamp | Shota Table Lamp