We put together the first set of table lamps in a solid version: Bruno, Julian, and Tokyo. These lamps are the final versions of our classic models. Before, we used spiral vase mode, but now we designed a solid base that gives them more weight and consistency, plus a hole for the cable.

What's included • Bruno, Julian and Tokyo in solid version, with our signature RippleMesh texture • A step-by-step instruction file to help you replicate the result shown in the photos

Model dimensions Based on print bed orientation.

BRUNO TABLE LAMP • Base: X: 128.10 / Y: 127.75 / Z: 109.20 • Shade: X: 202.93 / Y: 202.93 / Z: 127.20

JULIAN TABLE LAMP • Base: X: 139.51 / Y: 141.26 / Z: 149.40 • Shade: X: 212.70/ Y: 212.70 / Z: 139.20

TOKYO TABLE LAMP • Shade: X: 243.87 / Y: 243.87 / Z: 131.40 • Base: X: 166.78 / Y: 166.78 / Z: 104.40 • Lid: X: 117.15 / Y: 117.15 / Z: 7.18

Recommended slicers • Bambu Studio or PrusaSlicer

What you'll need to print • 0.4 mm or 0.8 mm nozzle • PLA or PETG

What you'll need to assemble • E27 screw socket with two nuts/rings — see photos for reference

Safety note (for the lamp) • If you’re using PLA, the bulb must be a low-consumption LED. We also recommend this type of bulb if you’re using PETG • Always turn off the power before any installation

Related product Bruno Classic | Julian Classic | Tokyo Classic |