Cable Management Retainer Hook for the Multiboard system. Use two small-thread bolts to affix this to your Multiboard peg-holes.

Remixed from remizik's under desk cable management hook: https://www.thingiverse.com/thing:4880502

Multiboard Cable Management Retainer Hook

Multiboard_Desk_Hook_Cable_Management.stl

Multiple Versions of Milwaukee M12 Tool Holders for Multiboard.

These files have not yet been fully tested for fitment on the Multiboard system, and may be updated. Print at your own risk.

Supports should not be needed, although the versions with press fit holes may benefit from a small tree-style support. Further testing needed.

I'd recommend a higher infill (at least 20%) than standard Multiboard prints, and at least 3 perimeters.

M12_Holder_Angled_Forward_SD_BigBolt_Wide_Multiboard.stl

M12_Holder_Angled_Forward_SD_BigBolt_Wide_WithPushFit_Multiboard.stl

M12_Holder_Angled_Forward_SD_BigBolt_Wide_Debadged_Multiboard.stl

M12_Holder_Angled_Forward_SD_BigBoltHOLE_Wide_Debadged_Multiboard.stl

Here's a primitive for the Multiboard Tight Snap system.

Work this into your 3d designs or use some quality epoxy to add it to whatever you want.

Multiboard Primitive - Tight Snap

Multiboard Tight Snap Primitive.stl

Here's a primitive for the Multiboard Snap system.

Work this into your 3d designs or use some quality epoxy to add it to whatever you want. 

Multiboard Primitive - Snap

Multiboard Snap Primitive.stl

Here's a primitive for the Multiboard Push-Fit system.

Work this into your 3d designs or use some quality epoxy to add it to whatever you want. 

Multiboard Primitive - Push-Fit

Multiboard Push-Fit Primitive.stl

Here's a primitive for the Multiboard pegboard click system. 

Work this into your 3d designs or use some quality epoxy to add it to whatever you want. It's best to respect the default part orientation (on its side) when printing if you want maximum strength. 


Multiboard Primitive - Pegboard Click

Pegboard Click Primitive.stl

Hey, nerd! I see you like to spend a lot of money on keyboards! Me too! These Gridfinity modules will help you keep all those spare keycaps organized. Sure, you'll be spending a bunch of extra money on filament just so you can store those bits of plastic, but it's a drop in the bucket compared to what you've spent on the clicky clackys.

These trays can hold a lot of keycaps. The Standard 5x5 modules can hold 110 1U keycaps, while the 9-Row 5x5 module can hold 88 1U keycaps and... um.... a bunch of weird keycaps too. Some number. More than 5 but less than 100. Probably. Or a keycap puller! That'll definitely fit there!

The standard 10-row 5x7 module can hold 162 keycaps, if you've got a big ol' print bed. And there's a 9-row 5x7 module that definitely has more space for weirdly shaped keys than the 9-row 5x5 module, too!

They're all stackable of course, at least with reasonably sized keycaps. If you like ridiculously high keycaps you might need to spend 5 minutes in your preferred 3D modeling software taller-izing them. Either that or beg me to do the 5 minutes of work for you!

Good luck getting them to not warp off your buildplate!

#Gridfinity

Gridfinity Mechanical Keyboard Keycap Storage Trays (5x5 and 5x7)

5x5 Gridfinity Keycap Storage 10 Standard Rows.stl

"Time to tap out some holes!" you think. "I'll just grab my tap and... oh. It's not where I left it. I'll just tap the holes with the screw instead, that always works!"

------------------

Here's a 1x1 Gridfinity tap holder for this specific tap:
https://www.amazon.com/gp/product/B077HTXVR1

It may very well hold similar taps, but you'll have to try it for yourself!

#Gridfinity

Gridfinity 1x1 Thread Tap Holder

A 2x4 Gridfinity compatible holder for the ThermoWorks Thermapen MK4.

I haven't tested this with the newer Thermapen Classic or the Thermapen One.  They look like they'll probably fit, but please do let me know in the comments if you try it with either of those!

I've made both a low profile version and a deeper, stackable version.

#Gridfinity

Gridfinity Thermapen MK4 Holder

Gridfinity 2x4 Thermapen Holder Shallow.stl

If you're anything like me you've been busy dropping Gridfinity baseplates into every single drawer in the house. Before you know it your life is wholly consumed by the grid.

But what do you do when your baseplates don't fit perfectly into your drawers? Randomly jam something into the gap? Glue, screw, or harness the power of magnets to hold them down? Just deal with them sliding around every time you open or close the drawer? Design a parametric print to fill the gap?

I chose the last option.
_______________________

In all seriousness, I've been wanting to start learning how to design parametric files in OpenSCAD, and this seemed like an embarrassingly easy place to start.

With this SCAD file you can make spacers to fill out the corners, or just single gaps at the front, rear or sides!

Simply take some measurements, fire up [OpenSCAD](https://openscad.org/), and plug those measurements into the customizer panel on the right hand side! After you've tuned your spacer to perfection, just hit the render button, then export the STL!

I had to include an STL model for Thangs to be happy, but don't use it unless you need to fill an exactly 10.01mm x 10.01mm x 4.41mm corner gap! Use the SCAD file to customize that spacer like the nerd we all know you are! It's in the ZIP file!

#Gridfinity

Gridfinity Parametric Baseplate Spacer

If you're anything like me you've been busy dropping Gridfinity baseplates into every single drawer in the house. Before you know it your life is wholly consumed by the grid.

But what do you do when your baseplates don't fit perfectly into your drawers? Randomly jam something into the gap? Glue, screw, or harness the power of magnets to hold them down? Just deal with them sliding around every time you open the drawer? Design a parametric print to fill the gap?

I chose the last option.

In all seriousness, I've been wanting to start learning how to design parametric files in OpenSCAD, and this seemed like an embarrassingly easy place to start.

Just take some measurements, fire up OpenSCAD, and plug those measurements into the customizer panel on the right hand side! You can make spacers to fill out the corner, or just single gaps at the front, rear or sides!

I had to include an STL model for Thangs to be happy, but don't use it unless you need to fill an exactly 10.01mm x 10.01mm corner gap! Use the SCAD file like the nerd we all know you are!

#Gridfinity

Back again with another incredibly specific Gridfinity module! This 1x1 module holds a single ⌀42mm bottle.

I specifically designed this to hold "Chubby Gorilla" brand 120ml e-liquid bottles, but any straight-sided ⌀42mm bottle will fit!

#Gridfinity

Gridfinity 1x1 42mm Bottle Holder - Fits 120ml Chubby Gorilla e-Liquid Bottles

This 1x1 Gridfinity module holds a single ⌀42mm bottle.

I specifically designed this to hold "Chubby Gorilla" brand 120ml e-liquid bottles, but any straight-sided ⌀42mm bottle will fit!

#Gridfinity

Sure, I know there are better, more robust Gridfinity button-cell battery holders out there. Of course there are. But this one matches my PARTICULAR use case. I only use these two sizes on the regular, so why not make an incredibly specific holder for them? Maybe you need this exact configuration too? I don't know! Here it is just in case.

This Gridfinity module can hold five (5!) LR44/SR44 batteries, and seven (7!) 2032 button-cell batteries! I designed it so that none of the batteries touch. That's important to me because they're quite easy to accidentally short. 

#Gridfinity

Gridfinity 1x1 2032 (x7) and LR44 (x5) Battery Holder

A small gridfinity module that can hold four 510-threaded electronic cigarette atomizers. The insets are made to accommodate atomizers up to 26mm in diameter.

There's a shortened version and a standard-height version to suit your preference!

#Gridfinity

Gridfinity 1x3 Atomizer Holder

Gridfinity 1x3 4x 510 Holder SHORT.stl

A 1x1 Gridfinity baseplate made to mount to the end of the Ender 3 or Ender 3 Pro's left 4040 base extrusion with the screws that are already there!

Perfect for holding your most used small tools!

The baseplate section has holes for four 6x2mm magnets to keep your gridfinity blocks stable! Make sure to double check your magnet's polarities before gluing them in!

The two screw-holes match my Ender 3 Pro's extrusion perfectly , but due to minor variances you may need to do a little bit of light filing/sanding to get them perfectly lined up.

When slicing, I used Cura's tree supports to make the top of the baseplate profile print consistently.

#Gridfinity

Gridfinity Ender 3 (± Pro) Extrusion-Mounted 1x1 Baseplate

A 1x1 Gridfinity baseplate made to mount to the end of the Ender 3 or Ender 3 Pro's left 4040 base extrusion with the screws that are already there!

Perfect for holding your most used small tools!

The baseplate section has holes for four 6x2mm magnets to keep your gridfinity blocks stable! Make sure to double check your magnet's polarities before gluing them in!

The two screw-holes match my Ender 3 Pro's extrusion perfectly , but due to minor variances you may need to do a little bit of light filing/sanding to get them perfectly lined up.

#Gridfinity

At the risk of having my nerd card revoked, I'll admit that I just don't need space for 6 nippers, strippers, and/or pliers. 

Rather than waste space with unused bays, I chopped Zack's original file down into this 2x2 Three-Bay Rack!

#Gridfinity

Gridfinity 2x2 Three-Bay Nipper, Stripper, Plier Rack

At the risk of having my nerd card revoked, I'll admit that I just don't need space for 6 nippers, strippers, and/or pliers. 

Rather than waste space with unused bins, I chopped Zack's original file down into this 2x2 Three-Bay Rack!

#Gridfinity

I use ABS plastic razor blades to assist in the removal of prints, skirts, and prime-lines from my 3D printer's bed. They're inexpensive and work wonderfully without damaging the bed surface! They are available here:

- [100 pack of blades with 2 full-Sized scraper handles](https://amzn.to/39gRtWW)
- [100 pack of blades with 2 mini scraper handles](https://amzn.to/3waAle8)
- [300 pack of blades](https://amzn.to/3l79860)


1x1x3 Gridfinity compatible plastic razor blade holder. Includes spaces for 7 plastic razor blades.

#Gridfinity

Gridfinity 1x1x3 Plastic Razor Holder

1x1 Gridfinity compatible tool holder to consolidate many of the stock Ender 3 & Ender 3 Pro tools. Includes spaces for:

- All five allen wrenches (1.5mm, 2.0mm, 2.5mm, 3.0mm, 4.0mm)
- Small screwdriver (also works well for a pair of tweezers)
- Both stamped metal nozzle/nut wrenches

#Gridfinity

Gridfinity 1x1x6 Ender 3 Tool Holder

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

LengAwaits

Achievements

Seedling

Fan Favorite

Voyager