Ho Ho Ho!

Whats included in this release:

🎅 Santa ( 3 parts)

🎅 Ornament version

🎅 Prepainted 3MF files

Santa prints in 3 parts! the head and body which are connected together by a snap fit pin that connects the two together. I've created a youtube short to illustrate how the parts fit together: Santa Youtube short

The pin should hold the two sections securely, they should not come apart with vigorous shaking, turning upside down, or when dropped. If it is a loose fit scale the pin 1-2% up in the slicer. If you are having a really hard time getting the pin into the sections try rotating it, you can also scale it down by 1-2%, but this might also cause a loose fit.

100% Santa stands inside 100% sleigh. Santa and the clip were tested down as little as 50% and up to 120%. Scaling up makes the pin thicker and will make assembling harder. I scaled the ornament version to 80% in the 3MF

⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐