Coffee Clicker - Ludo Clicker - Fidget Toy
2.3K downloads · 1 year ago · **Ludo Coffee clicker**
The Ludo Coffee clickers is addictively fun. You only need to snip plastic
Ludo Coffee clicker
The Ludo Coffee clickers is addictively fun. You only need to snip plastic standoffs if your clickers have them. This model will fold over electrical prongs as you press the clicker into place, so no need to snip those!
Assembly -Remove supports
- Press the clicker into the bottom part of the cup
- tPress the bottom part of the cup into the top part
Clicker This design will work with most 3 pin plate mounted keyboard switches. We Recommend..
- For Small Quantities Kailh Box White Clickers are the best.
- For Large Quantities: Pawpers, by Pawpular Prints : These also have pre-snipped prongs, making assembly easier!
Keychain Version This model is available with a hole cut for keychains. (Provided in the Easy Print 3mf only) Key chain
Printing
Print at 0.2mm layer height. Use adaptive layers to get a smoother top surface. Add tree supports to the underside of the top of the coffee cup.
Filaments I Used: White: Bambu Ivory white Black: Bambu Matte Charcoal Brown: Bambu Dark Brown
Coffee Clicker - Ludo Clicker - Fidget Toy
2.3K downloads · 1 year ago in and
Ludo Sheltie - Articulated Fidget dog
Jumping jackalope - Articulated Fidget Jackalope
Chatty Cockatoo - Articulated fidget Cockatoo
Ludo Havanese -Articulated Fidget Dog
Labradoodle - Articulated Fidget Dog
Ludo Pug - Articulated fidget dog
Popsicle Clicker
Buck-Tooth Beaver - Articulated fidget beaver
Ludo Boarder Collie - Articulated Fidget Dog
Ludo Springer Spaniel - Articulated Fidget Dog
Grumpy Goose - Articulated Fidget Goose
.png&w=3840&q=75)
Ludo Chihuahua - Articulated fidget Dog
Pecky Pigeon- Articulated Fidget Pigeon
Icky Iguana - Articulated fidget Iguana
Ludo Jack Russel - Articulated Fidget Dog
Squawking Seagull - Articulated Fidget Seagull
Ludo Pomeranian - Articulated Fidget Dog
Husky - Articualted Fidget Dog
Able Alien - Articulated fidget alien
Thank you for sharing! I'm glad you like the design!
We need an Iced Coffee one!!!
Man, this really needs a 4 cup drink carrier/stand
Hi, we will look into this but if you turn on arachne wall generator and/or "detect thin walls" that should fix it.
Sorry for the late response. I tried one of each of those setting and one with both setting and its better but still shows. Any updates on your end?
I am working on a fix and will have it updated soon. Sorry about that
Sorry for the wait, this model has been fixed if you would like to redownload!
Hi, We have printed these however our switches are getting stuck in the bottom of the cup? Any suggestions how to fix this? The switch is jambed down and doesn't pop back out. The switches we use are high quality switches that we use in all our models and don't seem to have problems.
Hi, it depends on the switch you are using. I have seen some switches with walls that seems to get stuck in themselves due to the walls bending outward when places on the printed post
Hello, your 3mf file doesn't work in prusa slicer. Could you also share stl files including the bottom part and the version without the ring on the lid?
Hi! I would suggest trying to open the 3mf in Bambu Studio or Orca slicer. Those slicers tend to open the file better due to the negative part added for the keychain hole.
Hi! can't seem to find the version with the keychain hole version
Hi! It is in the 3mf file. You should be able to find it if you open the file in Bambu Studio
Love all your clickers -- biggest feedback I've received about this one is wishing the clicker was on the top (lid) portion instead of the bottom.
Thank you for the feedback! I can add the change to the ideas list!