This came out perfect! I absolutely adore them! I love that there are minimal color changes so it would be easy to manually do color changes if I didn’t want to use the AMS.
Great model, however, I'm having an issue with the white base. Two of the corners are creating a hole that is showing through. The other two corners are fine. I tried randomizing the seams but that didn't fix it. Thoughts?
Hi, We have printed these however our switches are getting stuck in the bottom of the cup? Any suggestions how to fix this? The switch is jambed down and doesn't pop back out. The switches we use are high quality switches that we use in all our models and don't seem to have problems.
Hi, it depends on the switch you are using. I have seen some switches with walls that seems to get stuck in themselves due to the walls bending outward when places on the printed post
Hello, your 3mf file doesn't work in prusa slicer. Could you also share stl files including the bottom part and the version without the ring on the lid?
Hi! I would suggest trying to open the 3mf in Bambu Studio or Orca slicer. Those slicers tend to open the file better due to the negative part added for the keychain hole.
I am experiencing some problems with the switch getting stuck in the cup, it holds onto it somehow. Did you do anything special with your support settings?
Hi, I used the default tree (auto) support settings. Can you explain more on what is happening with your clicker? That way I can better help with the problem.
Discussions — Coffee Clicker - Ludo Clicker - Fidget Toy
Thank you for sharing! I'm glad you like the design!
We need an Iced Coffee one!!!
Man, this really needs a 4 cup drink carrier/stand
Hi, we will look into this but if you turn on arachne wall generator and/or "detect thin walls" that should fix it.
Sorry for the late response. I tried one of each of those setting and one with both setting and its better but still shows. Any updates on your end?
I am working on a fix and will have it updated soon. Sorry about that
Sorry for the wait, this model has been fixed if you would like to redownload!
Hi, We have printed these however our switches are getting stuck in the bottom of the cup? Any suggestions how to fix this? The switch is jambed down and doesn't pop back out. The switches we use are high quality switches that we use in all our models and don't seem to have problems.
Hi, it depends on the switch you are using. I have seen some switches with walls that seems to get stuck in themselves due to the walls bending outward when places on the printed post
Hello, your 3mf file doesn't work in prusa slicer. Could you also share stl files including the bottom part and the version without the ring on the lid?
Hi! I would suggest trying to open the 3mf in Bambu Studio or Orca slicer. Those slicers tend to open the file better due to the negative part added for the keychain hole.
Hi! can't seem to find the version with the keychain hole version
Hi! It is in the 3mf file. You should be able to find it if you open the file in Bambu Studio
Love all your clickers -- biggest feedback I've received about this one is wishing the clicker was on the top (lid) portion instead of the bottom.
Thank you for the feedback! I can add the change to the ideas list!
I am experiencing some problems with the switch getting stuck in the cup, it holds onto it somehow. Did you do anything special with your support settings?
Hi, I used the default tree (auto) support settings. Can you explain more on what is happening with your clicker? That way I can better help with the problem.