Hi all,

i'm back with a wall art wit open top layer design. This desings are made for printin on all printers.

More of this Pokémon hexagon are coming soon.

COMMERCIAL USE For personal: https://makerworld.com/en/@Kevyn3D

Check Pickachu HERE

Bambu Studio or orcaslicer - Instruction for the open top layer: The screenshots are from a other model but the steps ar the same (attached PDF), only some parameters changes. (the setting are set in the 3mf)

-In global tab choose the Octogram Spiral infill en enable supports -Go the the object tab; i used the Height range modifier (Right click on the object in the object tab) That way Pikachu have closed top layer

Choosing other infill is also possible (Archimedean Chord did'nt work for me)

Set the layes you want to change; in this case it's 0 to 15 mm

In the object tab set top layers to 0 and infill to Octogram Spiral

Dont forget to do the color swaps. for the green i used Bambu PLA-CF green, cause i like the color. But light green colors should do the trick.

Start with Orange

at layer 75 change to black

at layer 79 change to green

at layer 82 change to orange

at layer 85 change to yellow

Go also check my other models FOR COMMERCIAL USE