• Support Free
• Glue Free
• AMS not necessary

Rev up your setup with the Podium Pit Stop, the ultimate urban-style dock for the Nintendo Switch 2 console. This model is part of our Turbo District collection — a fully 3D-printable setup designed by Holoprops, inspired by the fun and fast-paced world of kart racing, reimagined in a cozy, brick-filled New York micro-city.

Let’s be clear: this is not an official Nintendo product, and it is not affiliated with Mario Kart or Nintendo in any way. Every detail — from the bricks to the cup to the tiny traffic lights — was hand-sculpted by Holoprops (no AI) using 100% original geometry. No assets were used or extracted from any video game. It’s a creative tribute made by and for passionate makers.

⸻

🚦 How it works

Slide your Nintendo Switch 2 console into the Podium Pit Stop, and it will rest perfectly in a raised, brick wall podium with an iconic trophy silhouette and urban Mario Kart-inspired vibes.

All console ports remain fully accessible — nothing is blocked, not even the airflow. The **ventilation **of the dock has been carefully respected, and even the tiny LED indicator of your console remains clearly visible from the side.

🛠️ The model assembles with zero glue, zero supports, and clicks into place with well-calibrated tolerances.

🎥 Need help with assembly? We’ve got you covered! A step-by-step video guide is available at the link below to show you exactly how to assemble each part with ease: 👉 Watch the Podium Pit Stop assembly video on Youtube

⸻

🧱 A tiny tribute to urban racing

Here’s what makes this dock extra special: • No glue or supports required for any part • All ports and vents remain accessible • The trophy wings are printed separately with precise tolerances • The traffic light on the lamp post can rotate freely • Dual-color printing optional: simply pause and change filaments if you don’t have AMS

⸻

🖨️ Printing Instructions & Best Practices

To get the same high-quality result as our showcase prints, we strongly recommend using the included 3MF file, designed and tuned in Bambu Studio.

Key settings: • Minimum Build Volume: 15 x 21 x 12 cm • Layer height: between 0.12 mm and 0.2 mm • Trophy wings: require a Brim • Infill Hatch 8%, 2 walls, 0% support • No AMS needed, except if you want to print the same wall as the model in the pictures • All elements are pre-aligned, have custom settings and ready to print

⚠️ If you choose to slice the STL files using another slicer, please note that custom settings (like Brim or colors) might be lost. This could affect the model’s final result. Proceed at your own risk!

⸻

✏️ Custom filament swaps

You can print all parts in single color or spice it up with dual tones. For accents (like the traffic light or lamp post), simply pause your print at the right layer and swap the spool — no AMS needed! If you do have an AMS, it will handle the changes automatically.

⸻

🛠️ Assembly Tips

All parts are snap-fit and require no glue. If parts don’t fit perfectly: • Check for elephant foot (bulging first layer) • Make sure your printer is properly tuned — tolerances have been carefully tested on our end.

⸻

🌆 Expand your Turbo District

The Podium Pit Stop is one part of a bigger, fully modular city setup. Don’t miss the other pieces in the Turbo District collection: • 🎥 Camera Tower – Mount your Nintendo Switch 2 Camera in a tiny NYC building • 🔧 Garage Stand – Drop in your Pro Controller 2 and reveal a hidden Hot Wheels! • 🛣️ RoadLink System – Included for free to connect every part seamlessly • 🧱 Prop Pack – Also included: traffic cones, crates, hydrants, AC units, barrels, and more!

Want to customize, share, or just geek out with other makers? Join our Discord and become part of the Holoprops community!

🔥 Let your console rest like a true champion. Welcome to Turbo District.

⸻

⚠️ This model is for personal use only. If you wish to sell physical prints, you must be an active Merchant Tier member of Holoprops. Thank you for respecting original creators and supporting the handcrafted art of Holoprops.

⸻

🎨 Filaments used in the photos:

• Polymaker PanChroma Marble Brick • Polymaker PanChroma Marble Limestone • Polymaker PanChroma Galaxy Dark Grey • Polymaker PolyTerra PLA Lava Red

These filaments bring out all the tiny details in the Turbo District Collection and give the models their signature look. You’re welcome to use any colors you like — but if you want the same vibe as our product shots, these are the ones we used!