Bopper Hammer Double Clicker

Part hammer, part fidget, and all fun! Both sides of the hammer can use different strength switches for more fidget clicky boppy fun!

"If all you have is a Bopper, all the world is a mole to whack." -Somebody, probably

Printing Notes: There are 3 print plates: #1 Hammer top and short handle colored by layer #2 Hammer heads #3 long handle

The switch sockets in the hammer top and hammer heads are labeled to help with lining them up.

We recommend using a brim on the handle as well as 5 walls on the handle for strength. Also, the top of the hammer has pre-painted normal supports on the bottom side. The heads of the hammer print with no supports, but you may want to test them on your printer to make sure the bridging works with no supports. These are colored by layer to not only reduce waste, but make it easy for those with single color printers to add a pause and swap filaments.

The hammer uses 4x Kailh Box 3 pin keyboard switches. The recesses include holes for both the standoffs and the copper pins, so you don't have to wast time trimming them! The clickers and tops snap in place, but we HIGHLY recommend glue for safety with children.

Model Files in Download Multi-color by layer .3mf 1 Color .3mf

Filaments Used in Photos Bambu Gold Sparkle PLA -Hammer heads Bambu Red PLA -hammer Bambu Jade White PLA -Hammer