M12 Bolt Cap (acorn nut without threads)
0 downloads · 9 months ago · M12 bolt cap
I needed a cap for a bolt that stuck out too far. Could run into this, gently, and be
This model is restricted by licensing terms.
View license.
M12 bolt cap
I needed a cap for a bolt that stuck out too far. Could run into this, gently, and be fine.
Printed in TPU, .2mm layers, 2 walls, 5 top, 3 bottom, 15% grid infill
Modeled this in Fusion - Parameterized so you can edit.
“ThickerWalls” file parameters:
- BoltDiameter = 12.24mm
- BoltLength = 18mm
- CapWallThickness = 6mm
- CapEndThickness = 8mm
M12 Bolt Cap (acorn nut without threads)
0 downloads · 9 months ago in and
This model is restricted by licensing terms.
View license.
LEt'GO Holiday Wreath - Nut and Bolt Cap Cover
STL Hardware Parts - Nuts, Bolts & Washers
My Customized NUT JOB | Nut, Bolt, Washer and Threaded Rod Factory
My Customized NUT JOB | Nut, Bolt, Washer and Threaded Rod Factory
My Customized NUT JOB | Nut, Bolt, Washer and Threaded Rod Factory
BOLT AND NUTS FACTORY M3 M4 M5 M6 M8 M10 M12
NUT for the Phone holder | Nut, Bolt, Washer and Threaded Rod Factory
Bolt and Nut Cover Generator
Bi-Directional Bolt & Nut
STL Hardware Parts - Imperial Nuts Bolts & Washers
Bolt & Nut Adapter for Ikea Skadis Pegboards
Print-In-Place Mini Nut & Bolt Spinner Free
1/2' x 1 1/4" Bolt and Nut(13pitch thread)
Oversized Bolt & Nut
Nut and bolt
Nut And Bolt
Fusion 360 nut and bolt guide
Decorative bolt cap
Nut Bolt Washer
