A low profile clamp for securing wood and plastic to a CNC router's wasteboard while still having full access to the top of the stock.
There are two version of this clamp, which differ based on how the the threading is added. This version uses a threaded insert that is pressed in by a soldering iron. The insert has a flange on to prevent it from getting pulled out of place. Compared to the second version, which uses a hex nut, the heat-set insert model can be tightened harder for further clamping force.
The clamp is secured through M5 bolts, and therefore, your wasteboard must have threaded insets (like these: https://amzn.to/2TunKBK)
Model fits within a 135 x 35 x 25mm volume.
Materials required for assembly: -1/4 x 1-1/4" Metal dowel x2 (https://amzn.to/3g4d2th) -M5 Het-Set Threaded Insert (McMaster-Carr: 97171A350) -25mm M5 Bolt (McMaster-Carr: 93070A129)
Equipment Required: Soldering iron for putting the heat set insert into place
3D Printing Settings: -Can be printed without support. Highest infill possible is recommended for rigidity.
The Toe clamp pairs wells with the Universal Right Angle Jig
Check out this video see my 3D printed work holding in action: https://youtu.be/cU-LR5Mn9fY