tracking pixel
DaveMakesStuff

Skull Pop Beads

by
DaveMakesStuff
Follow
Follow
Remix Model
DaveMakesStuff
DaveMakesStuff
|
Image 1 of 5
Skull Pop Beads 3d model
DaveMakesStuff
DaveMakesStuff
|
Image 1 of 5
Skull Pop Beads 3d model
2D
3D
Makes
Skull Pop Beads 3d model
Skull Pop Beads 3d model
Skull Pop Beads 3d model
Skull Pop Beads 3d model
Skull Pop Beads 3d model
This model is restricted by licensing terms. 

These “Skull Pop Beads” snap together to form spooky chains or rings as long as you want!

See here for video: https://youtu.be/pCv3Yx5U_7k

The pieces are designed to be printed in “Vase” or “Spiralized” mode. The file is optimized for printing with a 0.4mm nozzle. Printing with different nozzle sizes is still possible but will affect the tightness of fit.

Each piece uses approximately 0.4g of material, making this a great design to use up the scraps of filament you have lying around! A full 1kg roll could print approximately 2500 beads, enough to make a chain 50m (164ft) long!

To connect pieces together, simply pinch the top end of one piece so that the opening becomes oval-shaped. Insert the oval end of the second piece inside and release. The pieces remain connected but can be separated again if needed. Create long chains or rings by adding as many pieces as you want.

Each piece takes approximately 5 minutes to print. It is, however, much more efficient to print multiple pieces sequentially! Setting up spiralized models to print “one at a time” takes a bit of planning as the pieces must be spaced and sequenced properly so that the hot end or gantry does not collide with the finished prints as it moves on to the next print.

Make the bottom open by setting “bottom layers” to zero. Good build plate adhesion is essential, so ensure that your machine is well calibrated.

Similar Designs: Pop Bead Garland: https://social.thangs.com/m/513337

This design is entered into the 2023 HalloweenWearable contest

AI generated description:

Explore the dark side of arts and entertainment with this eerie "Skull Pop Beads" 3D model. These skull beads snap together to form elusive chains or rings that are entirely customizable based on your preference. Each piece is carefully optimized for printing with a 0.4mm nozzle size, and the model makes a perfect use of your excess filament, turning them into a stunning piece of 3D art. The puzzle-like feature of these skull pop beads allows the pieces to connect with ease, while also giving you the freedom to separate them when needed. Each individual piece takes approximately 5 minutes to print, making it quick and doable. The skull pop beads model captivates not only with its creative design but also with its practical approach to sustainability and cost-effectiveness. Perfect for Halloween or gothic-themed party decor, its versatility in design is its most incredibly appealing visual allure. Visit Thangs.com under the designer DaveMakesStuff for a better look at this fascinating 3D model.


226 Likes382 DownloadsOctober 7, 2023



226 Likes382 DownloadsOctober 7, 2023
This model is restricted by licensing terms.