The dual AMS stand works with the AMS 1 and AMS 2 PRO. The base of the AMS 1 is slightly larger and wider than the AMS 2 PRO so there will be a small gap of a few mm if using the AMS 2 PRO but this will not affect the functionality of the Sidekick.

CHANGELOG 2026-2-9 I revised the rear bottom roll out bar to correct an issue with the end connectors.

NEW: I recently uploaded the Dual AMS Sidekick stand which offers the same functions but with much more features. Link: https://cults3d.com/en/3d-model/tool/dual-ams-sidekick-stand

This is a 3d printed stand for use with dual Bambu Lab AMS (AMS 1 and AMS 2 PRO).

A similar model is also available for Anycubic's Ace Pro: https://cults3d.com/en/3d-model/tool/kobra-3-ace-dual-mount

It is designed to hold two AMS (AMS 1 and AMS 2 PRO)and features:

A roll-out base for the bottom AMS; A build plate holder which can be installed on either side; A modular tool tray to hold cutters, scrapers, filament clips and much more No external hardware is needed except for a few screws to attach the AMS (8x no.6 x1/2" (4mm x 12.5mm) wood screws (see instructions). Quick and easy to assemble - the parts are designed to lock together and be glued together (see instruction gif) Easy to print - little to no support is needed. customizable

The model for the build plate holder and the tool tray can be downloaded for free on MakerWorld.

Build plate holder link: https://makerworld.com/en/models/1037729#profileId-1021939

Tool tray link: https://makerworld.com/en/models/1037745#profileId-1021956

The top shelf is contoured to fit the bottom of the AMS and screw holes are provided to further secure the AMS on the top shelf.

Rollers with 4 wheels each are provided for the bottom AMS to enable it to roll in and out when you need to change the filament.

The parts are snug fit but it is preferable to glue the stand parts for added rigidity.

You will need Eight no. 6 wood screws 182 inch long (3.5 mm dia by 12.5mm length) to mount the rollers onto the AMS and to screw the top AMS to the top shelf (optional). See the instruction gif.

You may need a longer Bowden tube and/or Ace to Ace cable both of which are available from Bambu Labs.

Assembly

An assembly gif is provided. A zip file with the pictures and assembly instructions used in the assembly gif is also provided.

Assembly is quick and simple. A number of parts are mirrored so be careful when printing.

If you have any questions or issues, please let me know.