D3P RISER FOR ANYCUBIC KOBRA S1 MAX by Darren 3d Print

The D3P riser system is an innovative and modular riser system for your 3d printer. It features numerous free to download add-ons allowing you to customize your printer and riser like you want. The design of the D3P riser system is patent pending.

WHAT'S NEW

Some new features:

• Notched drawer bottoms to prevent drawers sliding open;
• Triple build plate holders;
• New lid holder (these are meant for temporary holding)
• Rear sliding vents for use with a new vent and filtering system (more details will be coming in the next few weeks). Th vent and filtering system will be offered as a paid addon due to the complexity of design.

FEATURES

Features of the D3P riser system:
• Front and side adjustable vents;
• Add-on extensions for dual Ace 2 units;
• Innovative COB LED channels that feature brackets to secure the LEDS in place;
• Top unit is set back to allow easy access to the printer from the top;
• Sturdy and reinforced construction and design to prevent sagging;
• Two large storage drawers with gridfinity style drawer inserts;
• Integrated build plate holder for three build plates;
• Integrated lid holders;
• Multiple add-ons such as a modular tool tray, interchangeable external spool holder and more to come;
• Detailed pdf instructions with pictures and steps;
• Printing requires little or no support.

INTELLECTUAL PROPERTY

This work is licensed under the standard digital file license. You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, reproducing or distributing the digital file or 3d printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes or copying/reproducing the design by any means).you are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.

A patent has been filed for the D3P riser design and it is patent pending. I thank you for your understanding.

ADD-ONS

The model features a number of add-ons that are free to download on Makeronline.

The addons are listed below but can also be seen by looking at my S1 Max collection: https://www.makeronline.com/en/user/collectionDetail/675c75ae-4f68-447f-902a-3dbdc36460d4/376025.html

Folding lid handle https://www.makeronline.com/en/model/Lid%20handle%20for%20Kobra%20S1%20for%20Kobra%20S1%20D3P%20riser/208245.html Single dryer extension shelf https://www.makeronline.com/en/model/Single%20dryer%20shelf%20extension%20for%20Kobra%20S1%20Max%20D3P%20riser/285315.html?trackModuleType=10 Dual dryer extension shelf https://www.makeronline.com/en/model/Dual%20dryer%20shelf%20extension%20for%20Kobra%20S1%20Max%20D3P%20riser/285313.html?trackModuleType=10 Ace 2 extension shelf https://www.makeronline.com/en/model/Dual%20Ace-2%20shelf%20extension%20for%20Kobra%20S1%20Max%20D3P%20riser/285310.html?trackModuleType=10 Ace 2 plus dryer extension shelf https://www.makeronline.com/en/model/Dual%20Ace-2%20%26%20dryer%20shelf%20extension%20for%20Kobra%20S1%20Max%20D3P%20riser/285312.html?trackModuleType=10 Interchangeable spool holder https://www.makeronline.com/en/model/Interchangeable%20spool%20holder%20for%20Kobra%20S1%20Max%20D3P%20riser/285336.html?trackModuleType=10 Modular tool tray https://www.makeronline.com/en/model/Modular%20tool%20tray%20for%20Kobra%20S1%20Max%20D3P%20riser/285338.html?trackModuleType=10 TPU top mount spool holder https://www.makeronline.com/en/model/Top%20mount%20TPU%20spool%20holder%20for%20use%20with%20the%20Kobra%20S1%20Max%20D3P%20riser/286199.html?trackModuleType=10 Tpu dryer top mount tray https://www.makeronline.com/en/model/Top%20mount%20TPU%20dryer%20tray%20for%20the%20Kobra%20S1%20Max/286198.html?trackModuleType=10 Side shelf https://www.makeronline.com/en/model/Side%20shelf%20for%20Kobra%20S1%20Max%20D3P%20riser/286197.html?trackModuleType=10 Rear cable management system https://www.makeronline.com/en/model/Rear%20cable%20management%20system%20for%20Kobra%20S1%20Max%20D3P%20riser/286195.html?trackModuleType=10 Side mounted build plate holder https://www.makeronline.com/en/model/Side%20build%20plate%20holder%20for%20Kobra%20S1%20Max%20D3P%20riser/286193.html?trackModuleType=10 Multiboard adapter https://www.makeronline.com/en/model/Multiboard%20adapter%20for%20Kobra%20S1%20Max%20D3P%20riser/286196.html?trackModuleType=10

I will be adding to these so be sure to check back from time to time.

MULTIMEDIA

Be sure to check out my new video about the Kobra S1 Max D3P.

I also created and assembly video for the D3P riser that was uploaded to Youtube - https://www.youtube.com/watch?v=wEsV2VzxKHw

TECHNICAL SPECIFICATIONS

For the base riser (approximates):
Filament: 3.8 kg (black 3.4 kg, gray 267g, green 197 g)

Approximate print time: 4 days 19h
Height of D3P riser : 21.5 cm (8.5 inches)

Height of S1 Max with riser (no Ace 2): 79 cm (31 inches)

Height of S1 Max with Ace 2 - closed : 101.6 cm (40 inches)

Height of S1 Max with Ace 2 open: 122 cm (48 inches)

Width of D3P riser: 49 cm (19.25 inches)

Width of D3P riser (dual Ace 2): 76 cm (30 inches)

Width of D3P riser (dual Ace 2 and single dryer) : 91 cm (36 inches)

EXTERNAL HARDWARE

LED strip

I am using an 8mm 5v 2 meter COB LED strip. I suggest you get a 1-1.5 meter extension preferable with an on-off switch. I also use an external power supply for it.

This is the link to the one I used: https://www.amazon.ca/dp/B0C89MFP3Q?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1

PRINT SETTINGS

IMPORTANT I upload a print setting files for all my models. The print settings has the parts positioned for correct printing and has the support painted by object.

YOU DO NOT NEED TO PAINT SUPPORT AS IT IS ALREADY PAINTED. EACH BUILD PLATE HAS THE TYPE OF SUPPORT REQUIRED INDICATED ON THE BUILD PLATE DESCRIPTION (TREE AUTO, TREE MANUAL OR NO SUPPORT) FOR REFERENCE.

I strongly recommended you use my print setting file. If not, I will not be able to assist you if there is an issue when printing. From experience, many of the issues with printing my models are on account of users not using my print settings.

CHANGELOG

If there are any changes to the STL files or print settings I will list them here. I recommend looking at this section prior to printing as it is the only way I can inform users of changes.

3D PRINT SETTINGS

I use the following settings and materials to print this model:
Infill % : 15% (no need for more)
Nozzle diameter: 0.4 mm
Layer height: 0.2 mm standard
Material: The Anycubic Kobra S1 Max has an internal heater. PETG is the preferred choice for filament as it is about the same price as PLA but will sustain higher temps without deforming. You can also print the riser using ASA or ABS but this is more challenging due to possibility of warping. If you will only be printing PLA or PETG and will not place a dryer on the riser then you can print in PLA. This suggestion applies to the entire riser and not only the base parts.

ASSEMBLY AND INSTRUCTIONS
A detailed instruction and assembly guide with steps and pictures is available for download with the model files.

There is also an assembly video on Youtube: https://www.youtube.com/watch?v=wEsV2VzxKHw

TROUBLESHOOTING

All parts and the assembly have been tested multiple times (both printing and assembly).
• Make sure your build properly cleaned and free of grease and oils before printing. This is the cause of adhesion.
• Make sure you use my print profiles/settings (the .3mf file that has multiple plates with all the parts) and that you enable support as indicated for each build plate on the build plate description.
• Filament and printer will affect tolerances however all should fit. If unsure proceed slowly and cautiously.
• If there are any changes I list them in a changelog on the model page. Please have a look at it prior to printing in the event there are any changes.

I am available to assist with any issues with this model.

The best way to reach me is through Facebook messenger - my user name is "Darren 3d print".

I thank you for your support and hope you like this model.