CHOIS Valet Stand Starter Kit

Build a full-size coat stand using 3D printed parts and wooden rods.

The CHOIS Valet Stand is a modular furniture kit that combines printed joints, wedges, hanger parts, and simple wooden dowels. No glue or screws are required for assembly.

Use it as a coat stand, hat stand, bag hanger, or entryway organizer.

What’s Included

• STL files for all printed parts
• Pre-configured 3MF file
• PDF assembly manual
• Calibration test ring
• Standard and loose fit options for the main joint
• Tight wedge options for fine adjustment

Required Separately

• 32 mm wooden rods or 1-1/4 in dowels
• 1 main pillar, approx. 1100 mm
• 3 legs, approx. 450 mm each

Rod lengths can be adjusted to fit your space.

Recommended Print Settings

• Layer height: 0.20 mm
• Wall loops: 4
• Infill: 15% cubic
• Supports: only for the hanger wings
• PLA can be used, but PETG or ABS is recommended for better durability.

For faster printing, some large parts can be printed at 0.28 mm layer height.

Important Notes

Please print the calibration test ring first to check the fit with your wooden rods.

This kit is designed for 32 mm wooden rods or 1-1/4 in dowels.

If you want to use 30 mm wooden rods, please download the free 30 mm Rod Adapters separately: https://thangs.com/designer/CraftedCycle/3d-model/CHOIS%20System%3A%2030mm%20Rod%20Adapters%20%5BFREE%5D-1577614

This is a digital download for 3D printing. Wooden rods and physical parts are not included.

Designed for everyday items such as coats, hats, and standard bags. Do not overload one side of the stand.