Turn your CHOIS system into a small sofa table.

This expansion part adds a round tabletop to your CHOIS modular furniture system.

Use it as a small sofa table, coffee table, plant stand, or display surface for your room.

---

Important Note

This page includes the sofa table top parts only.

The CHOIS base, leg joints, wooden rods, screws, and other accessories are not included.

---

What’s Included

• Table Top STL
• Table Hub STL
• 30mm Table Sleeve STL
• 32mm Table Sleeve STL
• 3MF file for ELEGOO Slicer
• 3MF file for Bambu Studio

---

Rod Compatibility

This model includes sleeve parts for:

• 30mm wooden rods
• 32mm wooden rods

Choose the sleeve that matches your rod size.

---

Recommended Hardware

• M4 × 20mm screws
• or similar #8 × 3/4 in screws

Screws are used to attach the tabletop to the Table Hub.

---

Suggested Rod Lengths

For the sample sofa table shown:

• Legs: 320mm × 3
• Center post: 500mm × 1

You can adjust the final height by changing the rod length.

---

Recommended Print Settings

• FDM printing
• No support needed
• Wall loops: 4
• Brim recommended for the tabletop
• Check fit before final assembly

The included 3MF files were prepared for ELEGOO Slicer and Bambu Studio. If they do not open correctly in your slicer, please use the STL files and apply your own print settings.

---

How to Use

Print the tabletop, Table Hub, and the sleeve for your rod size.

Attach the Table Hub to the tabletop with screws. Insert the sleeve onto the wooden center post. Then place the assembled tabletop part into the sleeve.

---

Designed for CHOIS

CHOIS is a modular furniture system that combines 3D printed parts with wooden rods.

This part is designed as an expansion piece for users who already have a CHOIS base system.

A full sofa table starter kit may be released later.