Select a membership plan

20% off
Personal
$8.00
/ month
when billed annually
  • Download 8 designs of your choice per month from my full catalogue
  • New products every week
  • Save 70% compared to purchasing models one by one
  • STL files for personal use only.

Your support means the world to me! Thanks for allowing me to keep going on this adventure!

This membership is for personal use only. No resale/redistribution of digital STL files is allowed, nor creation of mass production molds from these designs.

All designs offered through this membership are protected by intellectual property rights and are the sole property of Charles Regaud.

20% off
Commercial Seller License
$16.00
/ month
when billed annually
  • Unlimited downloads from my full library of 80+ STLs & new products every week
  • Commercial License to Sell physical 3D prints of my models
  • Access to product photos so you can start selling right away.

In more detail:

Commercial License

  • You can sell physical 3D prints of my designs anywhere you like. (cancelling this subscription would cancel your license to do so)
  • No resale/redistribution of digital STL files is allowed, nor creation of mass production molds from these designs.

Unlimited access to my full library of STLs

  • Gain access to my full library of STLs
  • At least 4 new designs added every month

TERMS & CONDITIONS:

- Originality in Photography/media:

You'll have access to my original photos/videos so can start selling right away.

However, I'd recommend you'd take pictures of your own prints of my designs.

Your listings will look more unique (and not duplicate of others) and will help you stand out.

- Unique Product Descriptions:

Do not use my original product descriptions.

Your product descriptions must be unique for the same reasons stated above.

- Designer Credit:

Please credit "Charles Regaud" or link back to one of my product pages in your product descriptions. In your Instagram posts of my designs, thanks to mention @charles_regaud somewhere and, as tit-for-tat goes, I'll gladly promote your posts on my profile.

Thanks for supporting my ongoing work!

All designs offered through this Membership are protected by intellectual property rights and are the sole property of Charles Regaud.

Charles R
CharlesRegaud2.8K followers
CharlesRegaud
CharlesRegaud
|
Image 1 of 5
SPEED BOAT | Scalable 3d model
CharlesRegaud
CharlesRegaud
|
Image 1 of 5
SPEED BOAT | Scalable 3d model
SPEED BOAT | Scalable 3d model
SPEED BOAT | Scalable 3d model
SPEED BOAT | Scalable 3d model
SPEED BOAT | Scalable 3d model
SPEED BOAT | Scalable 3d model

SPEED BOAT | Scalable

SPEED BOAT | Scalable

This was a special request from my little girls: a speedboat for their barbies.

So here it is! It can be scaled to any size. The original size has a length of 390mm, which can take about 5h to print. But I also printed it at 50% scale a couple of times, so my kids would all have one, and then for my kids' friends who started asking for one as well.

So if you print one, be ready to have to print many more for the entire neighbourhood...

DIMENSIONS | W 150mm x L 390mm x H 98 mm

Printing | ~5h

3D PRINT SETTINGS Resolution: 0.2mm / layer or less (the finer the resolution, the more watertight!) Build adhesion type: ~5mm Brim Infill Density: min. 5% (Gyroid) Supports: None

The boat was designed to be printed vertically, back face flat on the printing bed, as shown on the CURA shots in attachment. It's recommended to add some adhesion, like a 5~6mm brim or so, to make sure it doens't move during printing.


Discussions

SPEED BOAT | Scalable

55 downloads · 2 years ago in  and 
Charles R
CharlesRegaud2.8K followers