CharlesRegaud

Select a membership plan

Monthly billing

20% off

Personal

Personal

$8.00

/ month

when billed annually

Download 8 designs of your choice per month from my full catalogue
New products every week
Save 70% compared to purchasing models one by one
STL files for personal use only.

Your support means the world to me! Thanks for allowing me to keep going on this adventure!

This membership is for personal use only. No resale/redistribution of digital STL files is allowed, nor creation of mass production molds from these designs.

All designs offered through this membership are protected by intellectual property rights and are the sole property of Charles Regaud.

Immediate access. Cancel anytime.

20% off

Commercial Seller License

Commercial Seller License

$16.00

/ month

when billed annually

Unlimited downloads from my full library of 80+ STLs & new products every week
Commercial License to Sell physical 3D prints of my models
Access to product photos so you can start selling right away.

In more detail:

Commercial License

You can sell physical 3D prints of my designs anywhere you like. (cancelling this subscription would cancel your license to do so)
No resale/redistribution of digital STL files is allowed, nor creation of mass production molds from these designs.

Unlimited access to my full library of STLs

Gain access to my full library of STLs
At least 4 new designs added every month

TERMS & CONDITIONS:

- Originality in Photography/media:

You'll have access to my original photos/videos so can start selling right away.

However, I'd recommend you'd take pictures of your own prints of my designs.

Your listings will look more unique (and not duplicate of others) and will help you stand out.

- Unique Product Descriptions:

Do not use my original product descriptions.

Your product descriptions must be unique for the same reasons stated above.

- Designer Credit:

Please credit "Charles Regaud" or link back to one of my product pages in your product descriptions. In your Instagram posts of my designs, thanks to mention @charles_regaud somewhere and, as tit-for-tat goes, I'll gladly promote your posts on my profile.

Thanks for supporting my ongoing work!

All designs offered through this Membership are protected by intellectual property rights and are the sole property of Charles Regaud.

Immediate access. Cancel anytime.

CharlesRegaud3K followers

Follow

PICA | Brush, print-in-place 3d model

PICA | Brush, print-in-place 3d model

PICA | Brush, print-in-place 3d model

PICA | Brush, print-in-place 3d model

PICA | Brush, print-in-place

58 downloads · 9 months ago · **PICA | Brush** Here is a 100% print-in-place brush to use around the house. I use mine to catch

PICA | Brush

Here is a 100% print-in-place brush to use around the house. I use mine to catch rebellious purges from my 3D printers.

It prints in about 40min with a 0.4mm nozzle.

DIMENSIONS | L200mm x W40mm x H20mm It can print on a Bambu Lab A1 mini print bed (180x180mm) if you put it in diagonal

3D PRINT SETTINGS: The brush is meant to be printed with a 0.4mm nozzle. You'll need a few particular settings as follow:

• Wall loops: 2 • Layer height: 0.3mm/layer (ignore the warning in some slicers)

The lines of the weave pattern have a width of 2mm. So you can print in 40min with 2 wall lines of 1mm each, or in a bit more than 1h with a regular 0.5mm wall line width.

For a faster print (about 40min): • Line width (inner & outer wall): 1mm • Initial layer line width: default 0.5mm or so • Wall generator: Arachne (so your slicer can "detect" the bristles of the brush)

If you don't have "arachne mode" in your slicer, just go with regular settings, regular line width of about 0.5mm. The 2mm weave pattern will need 4 lines for each layer, so it will take about 1h10min to print.

Happy printing!

Tags:

Discussions

PICA | Brush, print-in-place

58 downloads · 9 months ago in

Print Bed Accessories

and

CharlesRegaud3K followers

Follow