DRAPED ELEGANCE | Table Lamp
3D PRINT SETTINGS
SHADE:
The shade must be printed with bottom and top faces "open".
You can either use the "spiralize" function to print in "vase mode" with 1 wall perimeter only (fine for the smooth shade version).
Line width: 0.8mm to 1mm (even with a 0.4mm nozzle, you can push it to 1mm easily)
If you want 2 lines in your walls (recommended for the textured shade), do not activate "spiralize", but instead use the following settings:
Resolution: 0.2 to 0.3mm / layer or less
Wall Line Count: 2
Infill: None
Top layers: 0 (to get rid of the top face)
Bottom layers: 0 (to get rid of the bottom face)
Build adhesion type: 6 to 8mm brim
Supports: None
BASE:
The base must be printed upside-down, so with the feet pointing up, and the round opening for the E14 socket on the printing bed.
Resolution: 0.2 to 0.3mm / layer or less
Wall Line Count: 2
Infill: 15 to 20% gyroid
Build adhesion type: 6 to 8mm brim
Supports: None
DRAPED ELEGANCE | Table Lamp
SINE | pendant light E27/E26
COROA | pendant light E27/E26
MALLA | woven fruit bowl
MALLA | key bowl
FALDA | Pendant Light E26/27
MALLA | Woven String Art Deco
SAKURA | Pendant Light E26/27
SAKURA | Scalable Pencil Holder
MALLA | nut bowl
![SAKU[MINI] | Table Lamp E14 & E26/27 3d model](/_next/image?url=https%3A%2F%2Fstorage.googleapis.com%2Fproduction-thangs-public%2Fuploads%2Fenhanced_images%2Fv1%2F421bb906-ca95-4bc9-9dba-a6fd01fd6885%2FSAKU%255BMINI%255D_table-lamp_perspective-ON.jpg&w=3840&q=75)
SAKU[MINI] | Table Lamp E14 & E26/27
SAKUMI | Table Lamp E14 & E26/27
SYZYGY | Heart Vase, scalable
TRAMA | Wall Clock
CARLA | Pendant Light E26/27
ORB XY | String Art Pendant Light
NINA | Toothbrush cups
PICA | Brush, print-in-place
MORPH | Stackable Egg Cup
ARYZ Divide | Pendant light E26/27
Just checked. All files are “corrupt” EXCEPT one file labeled “Draped-Elegance_Shade_V2”
Alright, Just uploaded all new versions of the files that are now at the right scale. I checked in various slicers (Cura, Bambu Studio, Orca slicer) and it seems to be fine on all of them.
They work!! Thx 💪🏽
You should really make these fit E25/26 light bulbs as they are more common in the US, i wanna make it this week! but its so hard finding e14 light bulbs that are RGB.
Hi! E26 version of this lamp is now available in the downloads. Let me know how it goes!
Messaged you on IG. The files show up with inaccurate measurements? theyre teenie tiny lol :/
Alright! Will do!
Hello. I can confirm that the E26 base still loads at the wrong size in Bambu Studio. Can I just scale to 200 X 175 X 107?
Hi, Just uploaded all new versions of the files that are now at the right scale. I checked in various slicers (Cura, Bambu Studio, Orca slicer) and it seems to be fine on all of them.