CURL | Phone Stand
CURL | Phone Stand
Meet our CURL phone stand, designed for fast-print (~1h) and robustness thanks to its thin and wavy profile.
The charging cable can run under the stand and plug to your phone with ease.
Print it in plain colour, or add a stripe as on the pictures, which really draws attention to the unique curve of the phone stand.
Happy printing!
DIMENSIONS | W 70mm x D 112mm x H 110 mm
Printing | ~1h
3D PRINTING SETTINGS
Resolution: 0.2mm / layer or less Wall count: better with 3, so you won't need infill Build adhesion type: ~4mm brim Supports: None Infill: None
If you want to print it with a stripe as on the pictures, add a "custom code" for filament change in your slicing software of choice. For the effect as on the pictures I set the first filament change at layer 40, then next filament change at layer 80, with a resolution of 0.2mm/layer. To do so, first, slice your model. Then, in CURA go to: Extensions > Post Processing > Modify Gcode > Add Script > Filament Change And in there you input the layer where you need the filament change to happen. Slice your model once again so it updates your Gcode. And there you go! Ready to print!