CANNELÉ | Wall/fridge Planter
Bring your garden to your fridge doors and walls with our CANNELÉ mini wall planter!
The wall-mounting bracket can accomodate magnets (two Ø20mm) with a thickness of up to 5mm. You can also mount it with screws. The screw hole has a diameter of 6mm, and screw head diameter of up to 10mm.
The hole in the planter has a diameter of 85mm, and height of 75mm.
DIMENSIONS | Ø 100mm x H 100 mm
Printing | Planter ~4h | Bracket + Drip Tray ~1.5h
3D PRINTING SETTINGS For a watertight dip tray, make sure your printer is well calibrated and lubricated. Then, increase the wall line count to 3. That should do it!
Resolution: 0.2mm / layer or less Infill: gyroid ~20% Build adhesion type: None Supports: None