CANNELÉ | Wall/fridge Planter

Bring your garden to your fridge doors and walls with our CANNELÉ mini wall planter!

The wall-mounting bracket can accomodate magnets (two Ø20mm) with a thickness of up to 5mm. You can also mount it with screws. The screw hole has a diameter of 6mm, and screw head diameter of up to 10mm.

The hole in the planter has a diameter of 85mm, and height of 75mm.

DIMENSIONS | Ø 100mm x H 100 mm

Printing | Planter ~4h | Bracket + Drip Tray ~1.5h

3D PRINTING SETTINGS For a watertight dip tray, make sure your printer is well calibrated and lubricated. Then, increase the wall line count to 3. That should do it!

Resolution: 0.2mm / layer or less Infill: gyroid ~20% Build adhesion type: None Supports: None