This is the 2nd new switch on the proton pack that sits under the crank gen

uses a super cheap easily available switch (KCD3) -not an ACDC tribute band...

You can take apart the original switch by simply inserting 2 thin shims (plectrums, playing cards, butter knife) on either side to release the tabs or a Stanley knife either side to cut tabs off, then all you need is the metal parts and the housing.

There are 2 versions of the lever depending on what the internals of your switch look like, one type will have a spring with a cap on, this is the spring pin file you will need to trim the spring to fit, the other version is for the type with a spring and a foot type connector, no modification needed, just put the spring in the hole.

You need a pin of some sort that is 10mm long and 2.5mm – 3mm wide (don’t use anything thinner as the switch might not lock into position)

video of how its put together (without plate but do plate 1st)
Youtube vid - https://youtu.be/MI6KYhMAyiw

Here are links to buy the switch (note: UK LINKS and there may be cheaper ones on these sites and others, links just to illustrate availability) just search KCD3 and go for the 2 pole on/off version (3 pin also fine)

Amazon - https://www.amazon.co.uk/Rectangle-Long-Rocker-Switch-SPST/dp/B00XWFDNRC/ref=sr_1_4?keywords=On-Off+Long+Rectangle+Rocker+Switch+SPST&qid=1636653251&s=diy&sr=1-4
Ali Express - https://bit.ly/3ojyf6I
Ebay - https://www.ebay.co.uk/itm/254768444971

Hope you enjoy - Feedback welcome
Ben

ALSO PLEASE DO NOT PRINT AND SELL - ive made these freely available to people who want them, and i offer a painted and assembled version for sale on my Etsy

Etsy Link
https://bit.ly/3FINAVE

Ghostbusters Afterlife - Proton Pack Crank Gen Switch

2nd Pack Switch (Spring & Pin Version).stl

detail seen on back of switch in some images

switch_back_detail.stl

**READ ME**

Here’s my take on the afterlife proton pack power switch, it’s based on technical drawings of the Leviton Single Pole 15 amp light switch but uses a super cheap easily available switch (KCD3) -not an ACDC tribute band...

You can take apart the original switch by simply inserting 2 thin shims (plectrums, playing cards, butter knife) on either side to release the tabs or a Stanley knife either side to cut tabs off, then all you need is the metal parts and the housing.

There are 2 versions of the lever depending on what the internals of your switch look like, one type will have a spring with a cap on, this is the spring pin file **you will need to trim the spring to fit**, the other version is for the type with a spring and a foot type connector, no modification needed, just put the spring in the hole.

You need a pin of some sort that is 10mm long and 2.5mm – 3mm wide (don’t use anything thinner as the switch might not lock into position)

video of how its put together (without plate but do plate 1st)
Youtube vid - https://youtu.be/MI6KYhMAyiw

Here are links to buy the switch (note: UK LINKS and there may be cheaper ones on these sites and others, links just to illustrate availability) just search KCD3 and go for the 2 pole on/off version (3 pin also fine)

Amazon - https://www.amazon.co.uk/Rectangle-Long-Rocker-Switch-SPST/dp/B00XWFDNRC/ref=sr_1_4?keywords=On-Off+Long+Rectangle+Rocker+Switch+SPST&qid=1636653251&s=diy&sr=1-4
Ali Express - https://bit.ly/3ojyf6I
Ebay - https://www.ebay.co.uk/itm/254768444971

Hope you enjoy - Feedback welcome
Ben

ALSO PLEASE DO NOT PRINT AND SELL - ive made these freely available to people who want them, and i offer a painted and assembled version for sale on my Etsy

Etsy Link
https://bit.ly/3FINAVE





Ghostbusters Afterlife - Proton Pack Power Switch

Switch Arm (Spring & Foot version).stl

switch detail seen on crank gen switch, may be on main power switch too

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4829239.

this is a charge stand for a wyze watch 47, charger fits snugly, hole in back to poke it back out.

it prints with no supports on its side though you may want a brim due to the chamfer, i could upload a non chamfered if people requested

any suggestions welcome

post pics of ya prints

feel free to tip if you like it

wyze watch 47 charge stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4491195.

Xiaomi Wowstick & Mijia case and bit holder (holds 200 Bits)

Note the file is slightly changed from the photos (improved)

this case is designed to hold both screwdrivers + 200 bits plus the long bits, the top acts as a screw tray and the wowstick can be charged whilst in the case, it is designed to be held together with an elastic band 

i use it and it works great

improvement suggestions welcome

IF YOU LIKE IT, BUY ME A COFFEE :)

Xiaomi Wowstick & Mijia case and Bit Holder (holds 200 Bits)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Bunjimun

Achievements

Seedling

Debutant

Explorer

Ghostbusters Afterlife - Proton Pack Crank Gen Switch

Ghostbusters Afterlife - Proton Pack Power Switch

wyze watch 47 charge stand

Xiaomi Wowstick & Mijia case and Bit Holder (holds 200 Bits)