Official HueForge TD Step Test USB-C Box

TD_Step_Test_Slide_in_Frame USB-C.stl

DB9 Banana Plug Adapter

This is a simple DB9 to a single banana plug connector. I needed this for work to get one of the pins to a DMM. You will need 2 M3x12 Flat Head Cap Screws.

Rugged Box Gridfinity Parametric.3mf

This is a parametric version of my Rugged Box Gridfinity(https://than.gs/m/841349) to change parameters, load in Fusion 360 and change the slotsWide, slotsDeep, and slotsHigh as needed for your application. TPU gasket is optional in most uses. Handle is optional and might not work with all box configurations.
WARNING: this handle is quite thin and only pressure fit, so make sure you test it with the weight of what you plan to keep in the box.

This is a mashup of the Rugged box from https://www.printables.com/model/258431-rugged-box-parametric/files and the Gridifinity base plate from here https://www.printables.com/model/377158/files\

Gridfinity HueForge TD Step Test Swatch Bins

1x3 Swatch Storage 4TD.stl

Rugged HueForge TD Swatch Box Mini

This mini box is for storing up to 40 of your HueForge TD swatches. This is a remix of the Rugged box found here https://www.printables.com/model/258431-rugged-box-parametric/files.

Official HueForge TD Step Test and Light Box

TD_Step_Test_Box_Top_Embossed_Text.stl

Rugged HueForge TD Swatch Box.3mf

This box is for storing all your HueForge TD swatches. This is a remix of the Rugged box found here https://www.printables.com/model/258431-rugged-box-parametric/files.


HueForge Frame and Box

This box was designed with the same concept as @OtherDogDesign's frame (found here https://www.printables.com/model/518556-parametric-frame-for-hueforge-filament-paintings/files) but adding the storage box that also scales parametrically. To change the box size in f360, download the .f3d file and alter the parameters.

RMRRF Drag Racer Hanger

This is a simple hook for hanging your RMRRF Drag Racer at the shows or at home. The small hook goes around the rear axel in between the rear bearings.

Village AI Generated Scannable QR Code

How about an AI generated QR code 3D printed using #HueForge? I really LOVE this concept.(BTW this QR code just leads to the website for the unreleased AI that created it) Super fun proof of concept!
Printed in ABS on the Bambu X1CC @ 0.04 layer heights.

**Print Settings**
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
	ABS BambuLab Black Transmission Distance: 0.3
	ABS Polymaker Dark Grey Transmission Distance: 1
	ABS Amazon Basics Light Grey Transmission Distance: 3
	ABS HatchBox White Transmission Distance: 5.5

Swap Instructions:
	Black until layer #11 at 0.56mm
	Dark Grey until layer #18 at 0.84mm
	Light Grey until layer #27 at 1.2mm
	White for the rest.

Disturbed Sound of Silence HueForge - Singing

Fan art for Disturbed's cover of Sound of Silence. Created using HueForge.

**Print Settings**

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
	ABS BambuLab Black Transmission Distance: 0.3
	ABS Sunlu Medium Grey Transmission Distance: 2
	ABS Amazon Basics Light Grey Transmission Distance: 3
	ABS HatchBox White Transmission Distance: 5.5

Swap Instructions:
	Black until layer #7 at 0.4mm
	Medium Grey until layer #8 at 0.44mm
	Light Grey until layer #15 at 0.72mm
	White for the rest.

Disturbed_Scream_Front_225x127.stl

Disturbed Sound of Silence HueForge

Fan art for Disturbed's cover of Sound of Silence. Created using HueForge.


**Print Settings**
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
	ABS BambuLab Black Transmission Distance: 0.3
	ABS Sunlu Medium Grey Transmission Distance: 2
	ABS Amazon Basics Light Grey Transmission Distance: 3
	ABS HatchBox White Transmission Distance: 5.5

Swap Instructions:
	Black until layer #7 at 0.4mm
	Medium Grey until layer #8 at 0.44mm
	Light Grey until layer #12 at 0.6mm
	White for the rest.

Rolling Gridfinity Octofinity Box - 3x1x4 Version

This is a 3x1x4 version of my Rolling Gridfinity Octofinity Box. (Original - https://than.gs/m/851197) The only parts that are altered is the Starter Bin Link and the Bin Link. Please note that the Bin Links have a substantially more narrow opening and will be very difficult to reach in for anything stored within.

Octofinity

I present to you Octofinity. This is in no way an attempt to copy Gridfinity. This was designed to allow for a clean and similar design style of Gridfinity to go with me Rolling Gridfinity Octofinity Box(https://than.gs/m/851197). This was designed to have the same 42mm design as Gridfinity to allow for direct use is any other design.

Octofinity.3mf

Rolling Gridfinity Octofinity Box

I am very excited to introduce to you the Rolling Gridfinity Octofinity Storage box. This design was inspired by the video that Zack Freedman(https://than.gs/u/76763) did covering 3DPrinty's(https://than.gs/u/103932) Rolling Storage Box(https://than.gs/m/31111). After watching that video I knew I hade to make a Gridfinity version.

I have not fully printed this design myself yet, but I have printed some of the parts to insure fitment.

Rolling Gridfinity Octofinity Box.3mf

Rugged Box Gridfinity 3x4

Hello,
This is my mashup of the Rugged box from https://www.printables.com/model/258431-rugged-box-parametric/files and the Gridifinity base plate from here https://www.printables.com/model/377158/files

This is the official TD(Transmission Distance) step test developed by the creator of HueForge(listed here with his permission). This test can be used to test the TD of your filament TDs. This is the LEDs for the light box https://www.amazon.com/BTF-LIGHTING-Dimmable-Flexible-Backlight-Decoration/dp/B08X6LHLR9/ref=mp_s_a_1_1_sspa?crid=379DBJCY97I2S&keywords=usb%2Bcob%2Bled%2Bstrip&qid=1691975850&sprefix=usb%2Bcob%2B%2Caps%2C99&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9waG9uZV9zZWFyY2hfYXRm&th=1.

**Print Settings**
- TD_Step_Test - 100% infill @ 0.2 layer, filament type and color you are testing.
- TD_Step_Test_Plus_4 - 100% infill @ 0.2 layer, filament type and color you are testing. - TD_Step_Test_Slide_In_Frame - 2+ walls 15% infill, 3-5 top and bottom layers, black/dark filament
- TD_Step_Test_Box_Top - 2+ walls 15% infill, 3-5 top layers, black/dark filament(choose from the three options.) For multicolor text, choose your color for the text.

**Testing Filament**
Place the step test into the viewing lid and with the led lights on check for the step where the light starts to dim to the point that any steps beyond are all the same brightness. The last step before the final dimming, is your calculated TD value. If all the steps are bright, print and insert a TD_Step_Test_Plus_4 of the same filament under the step test block and check again. This block adds 4 to the number on the top of the box. If adding one TD_Step_Test_Plus_4 block is still not enough, keep adding additional TD_Step_Test_Plus_4 blocks till the steps begin to dim.

TD_Step_Test.stl

1x2 Swatch Storage 8TD.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

AJAX

Achievements

Seedling

Explorer

Fan Favorite