Gridfinity compatible multicolor Bambu Lab A1 Sauce Bottle. Print at any infill you like, I recommend at least 15% and at least 2 walls.

Bambu Lab A1 Gridfinity Bottle

Gridfinity Bambu A1 Bottle v1.3mf

This is a USB-C version of the box from this model https://than.gs/m/917384. You will need some of the following LEDs and UBS-C breakout boards. Please note that I bought a 10 pack of the USB-C boards, and the first two I pulled out didn't work. Make sure you test before you go through all the trouble of installing in the box.
**Parts Needed**
- LEDs  - https://a.co/d/1jn8OZ2
- USB-C Breakout board - https://a.co/d/eJuP9L9


Official HueForge TD Step Test USB-C Box

TD_Step_Test_Slide_in_Frame USB-C.stl

This is a simple DB9 to a single banana plug connector. I needed this for work to get one of the pins to a DMM. You will need 2 M3x12 Flat Head Cap Screws.

DB9 Banana Plug Adapter

This is a parametric version of my Rugged Box Gridfinity(https://than.gs/m/841349) to change parameters, load in Fusion 360 and change the slotsWide, slotsDeep, and slotsHigh as needed for your application. TPU gasket is optional in most uses. Handle is optional and might not work with all box configurations.
WARNING: this handle is quite thin and only pressure fit, so make sure you test it with the weight of what you plan to keep in the box.

This is a mashup of the Rugged box from https://www.printables.com/model/258431-rugged-box-parametric/files and the Gridifinity base plate from here https://www.printables.com/model/377158/files\

**EDIT 8/17/2023**
Changed the label for the lid body to no longer be body32 but rather be Box Lid. This change has no geometry changed and is purely a labeling correction.

Rugged Box Gridfinity Parametric.3mf

This is a parametric version of my Rugged Box Gridfinity(https://than.gs/m/841349) to change parameters, load in Fusion 360 and change the slotsWide, slotsDeep, and slotsHigh as needed for your application. TPU gasket is optional in most uses. Handle is optional and might not work with all box configurations.
WARNING: this handle is quite thin and only pressure fit, so make sure you test it with the weight of what you plan to keep in the box.

This is a mashup of the Rugged box from https://www.printables.com/model/258431-rugged-box-parametric/files and the Gridifinity base plate from here https://www.printables.com/model/377158/files\

This is a collection of Gridfinity bins designed to not only store your filament TD_Step_Test swatches. These bins not only store your swatches, but the also snap into place to prevent accidental spillage.
- Bins ending with 4TD are designed to store filaments with a TD of 4 or less. They allow for a single TD_Step_Test swatch to snap into place.
- Bins ending with TD8 are designed to store filament with a TD between 4.2 and 8. They are designed with a double space to allow for storage of the TD_Step_Test swatch and a TD_Step_Test_Plus_4 swatch stacked together. These also snap into place.
- Bins ending with TD12 are designed to store filament with a TD between 8.2 and 12. They are designed with a triple space to allow for storage of the TD_Step_Test swatch and two TD_Step_Test_Plus_4 swatches stacked together. These also snap into place.
These bins were designed to pair perfectly with my Official HueForge TD Step Test found here https://than.gs/m/917384 and my Rugged Box Gridfinity Parametric model, found here https://than.gs/m/918184

Gridfinity HueForge TD Step Test Swatch Bins

1x3 Swatch Storage 4TD.stl

This mini box is for storing up to 40 of your HueForge TD swatches. This is a remix of the Rugged box found here https://www.printables.com/model/258431-rugged-box-parametric/files.

Rugged HueForge TD Swatch Box Mini

This is the official TD(Transmission Distance) step test developed by the creator of HueForge(listed here with his permission). This test can be used to test the TD of your filament TDs. This is the LEDs I used for the light box https://www.amazon.com/BTF-LIGHTING-Dimmable-Flexible-Backlight-Decoration/dp/B08X6LHLR9.
These LEDs can be substituted with any 5v LEDs with a similar LED per inch density.
Video tutorial - https://www.youtube.com/live/iPjsLEmgbog?feature=share

**Print Settings**
- TD_Step_Test - 100% infill @ 0.2 layer, filament type and color you are testing.
- TD_Step_Test_Plus_4 - 100% infill @ 0.2 layer, filament type and color you are testing. - TD_Step_Test_Slide_In_Frame - 2+ walls 15% infill, 3-5 top and bottom layers, black/dark filament
- TD_Step_Test_Box_Top - 2+ walls 15% infill, 3-5 top layers, black/dark filament(choose from the three options.) For multicolor text, choose your color for the text.

**Testing Filament**
Place the step test into the viewing lid and with the led lights on check for the step where the light starts to dim to the point that any steps beyond are all the same brightness. The last step before the final dimming, is your calculated TD value. If all the steps are bright, print and insert a TD_Step_Test_Plus_4 of the same filament under the step test block and check again. This block adds 4 to the number on the top of the box. If adding one TD_Step_Test_Plus_4 block is still not enough, keep adding additional TD_Step_Test_Plus_4 blocks till the steps begin to dim.

**EDIT 8/15/2023**
Uploaded a V2 of the following
- TD_Step_Test_Box_Top models(adds a notch for proper indexing the TD_Step_Test and grooves for easy swatch removal)
 - TD_Step_Test(with grooves to align with new notch in the TD_Step_Test_Box_Top)
- TD_Step_Test_Plus_4(adds the same grooves as the TD_Step_Test)
All previous models are still valid ways of testing your filament. These updated models just add some quality of life improvements and allows for additional quality of life improvements for storage solutions such as https://than.gs/m/918176.

**EDIT 8/16/2023**
Uploaded a V2 of the following
- TD_Step_Test_Slide_In_Frame to removed the overhang, add a detent for snapping the TD_Step_Test_Box_Top in place. 
- TD_Step_Test_Box_Top(each option) added detent for snapping into TD_Step_Test_Slide_In_Frame. Added HueForge Text. Extended bottom length to end of box.

**EDIT 8/17/2023**
Added 1mm_diffuser. Print in white and drop into the bottom of the box.

**EDIT 9/9/2023**
Corrected the TD_Step_Test object. There was an error that made the 2.0 and 2.2 the same height and every other step above 2.2 was off by 0.2.

Official HueForge TD Step Test and Light Box

TD_Step_Test_Box_Top_Embossed_Text.stl

1mm_Diffuser.stl

This box is for storing up to 140 of your HueForge TD swatches. This is a remix of the Rugged box found here https://www.printables.com/model/258431-rugged-box-parametric/files.


Rugged HueForge TD Swatch Box.3mf

This box is for storing all your HueForge TD swatches. This is a remix of the Rugged box found here https://www.printables.com/model/258431-rugged-box-parametric/files.


This box was designed with the same concept as @OtherDogDesign's frame (found here https://www.printables.com/model/518556-parametric-frame-for-hueforge-filament-paintings/files) but adding the storage box that also scales parametrically. To change the box size in f360, download the original file and alter the parameters in the .f36 file. Setting the Image with and image height to exactly what your HueForge print is, should give the perfect spacing for the floating affect. Print 3 or 4 of the alignment jigs for easy image alignment.

HueForge Frame and Box

This box was designed with the same concept as @OtherDogDesign's frame (found here https://www.printables.com/model/518556-parametric-frame-for-hueforge-filament-paintings/files) but adding the storage box that also scales parametrically. To change the box size in f360, download the .f3d file and alter the parameters.

This is a simple hook for hanging your RMRRF Drag Racer at the shows or at home. The small hook goes around the rear axel in between the rear bearings.

RMRRF Drag Racer Hanger

How about an AI generated QR code 3D printed using #HueForge? I really LOVE this concept.(BTW this QR code just leads to the website for the unreleased AI that created it) Super fun proof of concept!
Printed in ABS on the Bambu X1CC @ 0.04 layer heights.

**Print Settings**
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
	ABS BambuLab Black Transmission Distance: 0.3
	ABS Polymaker Dark Grey Transmission Distance: 1
	ABS Amazon Basics Light Grey Transmission Distance: 3
	ABS HatchBox White Transmission Distance: 5.5

Swap Instructions:
	Black until layer #11 at 0.56mm
	Dark Grey until layer #18 at 0.84mm
	Light Grey until layer #27 at 1.2mm
	White for the rest.

Village AI Generated Scannable QR Code

Fan art for Disturbed's cover of Sound of Silence. Created using HueForge.

**Print Settings**

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
	ABS BambuLab Black Transmission Distance: 0.3
	ABS Sunlu Medium Grey Transmission Distance: 2
	ABS Amazon Basics Light Grey Transmission Distance: 3
	ABS HatchBox White Transmission Distance: 5.5

Swap Instructions:
	Black until layer #7 at 0.4mm
	Medium Grey until layer #8 at 0.44mm
	Light Grey until layer #15 at 0.72mm
	White for the rest.

Disturbed Sound of Silence HueForge - Singing

Disturbed_Scream_Front_225x127.stl

Fan art for Disturbed's cover of Sound of Silence. Created using HueForge.


**Print Settings**
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
	ABS BambuLab Black Transmission Distance: 0.3
	ABS Sunlu Medium Grey Transmission Distance: 2
	ABS Amazon Basics Light Grey Transmission Distance: 3
	ABS HatchBox White Transmission Distance: 5.5

Swap Instructions:
	Black until layer #7 at 0.4mm
	Medium Grey until layer #8 at 0.44mm
	Light Grey until layer #12 at 0.6mm
	White for the rest.

Disturbed Sound of Silence HueForge

This is a 3x1x4 version of my Rolling Gridfinity Octofinity Box. (Original - https://than.gs/m/851197) The only parts that are altered is the Starter Bin Link and the Bin Link. Please note that the Bin Links have a substantially more narrow opening and will be very difficult to reach in for anything stored within.

Rolling Gridfinity Octofinity Box - 3x1x4 Version

I present to you Octofinity. This is in no way an attempt to copy Gridfinity. This was designed to allow for a clean and similar design style of Gridfinity to go with my Rolling Gridfinity Octofinity Box(https://than.gs/m/851197). This was designed to have the same 42mm design as Gridfinity to allow for direct use is any other design.

Octofinity

I present to you Octofinity. This is in no way an attempt to copy Gridfinity. This was designed to allow for a clean and similar design style of Gridfinity to go with me Rolling Gridfinity Octofinity Box(https://than.gs/m/851197). This was designed to have the same 42mm design as Gridfinity to allow for direct use is any other design.

Octofinity.3mf

I am very excited to introduce to you the Rolling Gridfinity Octofinity Storage box. This design was inspired by the video that Zack Freedman(https://than.gs/u/76763) did covering 3DPrinty's(https://than.gs/u/103932) Rolling Storage Box(https://than.gs/m/31111). After watching that video I knew I hade to make a Gridfinity version.

I have not fully printed this design myself yet, but I have printed some of the parts to insure fitment.

Here is the BOM
4 x M3x6mm SHCP(Socket Head Cap Screws)
15 x 126mm 1.75mm filament
1 x 130mm 1.75mm filament
8 X Gridfinity Boxes size 3x1x6(or stacked bins equaling the height of the x6)

That's it! Every other part is printed!

EDIT: I have now printed all the parts(of course I had to print my Gridfinity bins in ROYGBIV color scheme). I did find that the spacing for the Octofinity bin was slightly larger than I liked so I decreased this spacing slightly. Changes have been uploaded.

Rolling Gridfinity Octofinity Box

I am very excited to introduce to you the Rolling Gridfinity Octofinity Storage box. This design was inspired by the video that Zack Freedman(https://than.gs/u/76763) did covering 3DPrinty's(https://than.gs/u/103932) Rolling Storage Box(https://than.gs/m/31111). After watching that video I knew I hade to make a Gridfinity version.

I have not fully printed this design myself yet, but I have printed some of the parts to insure fitment.

Rolling Gridfinity Octofinity Box.3mf

Gridfinity 1x3 adapted to hold 4 Bmabu Lab nozzles. They are set at a 45-degree angle and staggered to allow each to have their size easily visible. It may not be obvious, but when the bin has nozzles inserted they stick up too far to stack another bin on top of.

EDIT: Added a V2 as the one I printed I cracked it and I felt like the rim was just too thin. Widened up the rim all the way to the surface.

Bambu Nozzle Gidfinity 1x3

Gridfinity 1x3 adapted to hold 4 Bmabu Lab nozzles.

Bambu Nozzle Gidfinity 1x3.stl

**UPDATE**
Need this box it any other size? It is now listed as a parametric file! You can find it here https://than.gs/m/918184
This is my mashup of the Rugged box from https://www.printables.com/model/258431-rugged-box-parametric/files and the Gridifinity base plate from here https://www.printables.com/model/377158/files\

Also pictured is my Gridfinity Bambu Nozzle part https://than.gs/m/842099

EDIT: Added a model to be printed in TPU to keep bins in place and from spilling out.

EDIT 2: Per request, added a simple handle. I also changed the holes that the screws go into to allow them to be installed from the inside out as these screw heads are where the handle hinge on. WARNING: this handle is quite thin so make sure you test it with the weight of what you plan to keep in the box.

Rugged Box Gridfinity 3x4

Hello,
This is my mashup of the Rugged box from https://www.printables.com/model/258431-rugged-box-parametric/files and the Gridifinity base plate from here https://www.printables.com/model/377158/files

This is the official TD(Transmission Distance) step test developed by the creator of HueForge(listed here with his permission). This test can be used to test the TD of your filament TDs. This is the LEDs for the light box https://www.amazon.com/BTF-LIGHTING-Dimmable-Flexible-Backlight-Decoration/dp/B08X6LHLR9/ref=mp_s_a_1_1_sspa?crid=379DBJCY97I2S&keywords=usb%2Bcob%2Bled%2Bstrip&qid=1691975850&sprefix=usb%2Bcob%2B%2Caps%2C99&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9waG9uZV9zZWFyY2hfYXRm&th=1.

**Print Settings**
- TD_Step_Test - 100% infill @ 0.2 layer, filament type and color you are testing.
- TD_Step_Test_Plus_4 - 100% infill @ 0.2 layer, filament type and color you are testing. - TD_Step_Test_Slide_In_Frame - 2+ walls 15% infill, 3-5 top and bottom layers, black/dark filament
- TD_Step_Test_Box_Top - 2+ walls 15% infill, 3-5 top layers, black/dark filament(choose from the three options.) For multicolor text, choose your color for the text.

**Testing Filament**
Place the step test into the viewing lid and with the led lights on check for the step where the light starts to dim to the point that any steps beyond are all the same brightness. The last step before the final dimming, is your calculated TD value. If all the steps are bright, print and insert a TD_Step_Test_Plus_4 of the same filament under the step test block and check again. This block adds 4 to the number on the top of the box. If adding one TD_Step_Test_Plus_4 block is still not enough, keep adding additional TD_Step_Test_Plus_4 blocks till the steps begin to dim.

AJAX

Achievements

Seedling

Explorer

Fan Favorite

Pinned models

Official HueForge TD Step Test and Light Box

Gridfinity HueForge TD Step Test Swatch Bins

Rugged Box Gridfinity Parametric.3mf

Bambu Lab A1 Gridfinity Bottle

Official HueForge TD Step Test USB-C Box

DB9 Banana Plug Adapter

Rugged Box Gridfinity Parametric.3mf

Gridfinity HueForge TD Step Test Swatch Bins

Rugged HueForge TD Swatch Box Mini

Official HueForge TD Step Test and Light Box

Rugged HueForge TD Swatch Box.3mf

HueForge Frame and Box

RMRRF Drag Racer Hanger

Village AI Generated Scannable QR Code

Disturbed Sound of Silence HueForge - Singing

Disturbed Sound of Silence HueForge

Rolling Gridfinity Octofinity Box - 3x1x4 Version

Octofinity

Rolling Gridfinity Octofinity Box

Bambu Nozzle Gidfinity 1x3

Rugged Box Gridfinity 3x4