Messy desk or backpack? This can help! This is a fun storage solution to organize desk goods/supplies! Even Better this thing prints on a Bambulab A1 mini! Happy printing!

IMPORTANT MUST READ SETTINGS -The settings for this print are non-negotiable. If you try and print it with your own settings, you will get a bad print. Follow my instructions to get results like mine. Your threads also won't print if you do it another way.

Layer Height- .16 cannot be .2 or higher. Infill - 25% minimum Wall generator- classic Walls-3 Manual supports required on the eraser band and pencil tip. You will need to paint them on the underside of the metal band and for the pencil tip paint them on the rim above the threads. I do organic tree slim. For brims use outer brim if you are getting poor bed adhesion. Speed- I do mine slower since it is a tall print. I do around 150mm/s.

For coloring the pencil, I have not included a .3mf I am learning on how to export just colors. For painting use section height on the eraser band and pencil tip. Otherwise, the print will get an error. For the pencil body you can use gap fil on the lettering.

IF you run into problems printing this, please let me know. I will help guide you through your issues.

ENJOY.