These files are for Personal Use Only. If you would like a Commercial License to sell prints made from these designs, please join me on Patreon: https://www.patreon.com/kazitoad

Move over boat, there is a new benchmark in town.

This robot is not only a fun print-in-place figure but it is also a very useful calibration tool.

The robot is designed with 17 functional joints with different orientations, couplings, and tolerances. The tolerances range from 0.2 - 0.5mm and allow you to test the minimum clearances your printer can produce and still achieve print-in-place movement.

Each limb is labeled with the tolerances of their joints and all other joints have a 0.3mm tolerance. It might take a little (just a little) bit of force to break them free any more and you risk breaking the robot.

It only uses 20g of filament and is small enough to fit on a Prusa mini or even a Voron V0.

To add to the #MakerMadness theme I have added some accessory, because what says "spring" more than a robot wearing sunglasses and holding a flower 😁.

Link to the Rock version:
https://thangs.com/mythangs/file/55887

Print Settings:

No support!
No brim!

The point of the Benchmark Bot is to find the best parameters to make it function, therefore it is difficult to recommend any settings.

That being said, I used the following parameters:
0.4mm nozzle, 0.2mm layer height, PLA, 3 walls, 4 top/bottom layers, 10% infill.

Benchmark Bot

Move over boat, there is a new benchmark in town.

This robot is not only a fun print-in-place figure but it is also a very useful calibration tool.

The robot is designed with 17 functional joints with different orientations, couplings, and tolerances. The tolerances range from 0.2 - 0.5mm and allow you to test the minimum clearances your printer can produce and still achieve print-in-place movement.

Each limb is labeled with the tolerances of their joints and all other joints have a 0.3mm tolerance. It might take a little (just a little) bit of force to break them free any more and you risk breaking the robot.

It only uses 20g of filament and is small enough to fit on a Prusa mini or even a Voron V0.

Benchmark Bot (Kazi Toad)

Benchmark Bot Flower

Benchmark_Bot_sunglasses_KaziToad.stl

watering can

**Rockgu**

Another mashup for fans of The Rock.

Remixed from:
1) https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson
&
2) https://www.thingiverse.com/thing:4065967

Size: 113 x 66 x 100 (Scale up or down as you please)

If you would like to support my work, or have access to all of my files you can consider my Patreon!

https://www.patreon.com/thinair3D

FDM or Resin

Supports: Yes (for the ears, none needed anywhere else). I have included a photo of what my supports looked like.

Infill: 10-15%
Perimeters: 2

Approx Print Time: 5 hrs

Rockgu (The Rock + Grogu Mashup)

**Rockgu**

Another mashup for fans of The Rock.

Remixed from:
1) https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson
&
2) https://www.thingiverse.com/thing:4065967

Size: 113 x 66 x 100 (Scale up or down as you please)

If you would like to support my work, or have access to all of my files you can consider my Patreon!

patreon.com/thinair3D

FDM or Resin

Supports: Yes (for the ears, none needed anywhere else). I have included a photo of what my supports looked like.

Infill: 10-15%
Perimeters: 2

Approx Print Time: 5 hrs

Uploaded to thingiverse Nov 28, 2021 and for some reason they removed the file. 

"Just jumpin' on THE ROCK bandwagon . . .

Dwayne The Rock Johnson meets Grogu .

Ignore me . . .

remixed from:
https://www.thingiverse.com/thing:5142294
https://www.thingiverse.com/thing:4966579

Notes:
Resized to 40mm height in slicer with "tree" supports. Most came off while removing from build plate."

Model with smaller ears here - 
https://social.thangs.com/m/58999


GROCKGU -  The Rock meets Grogu 

Uploaded to thingiverse Nov 28, 2021 and for some reason they removed the file. 

"Just jumpin' on THE ROCK bandwagon . . .

Dwayne The Rock Johnson meets Grogu .

Ignore me . . .

remixed from:
https://www.thingiverse.com/thing:5142294
https://www.thingiverse.com/thing:4966579

Notes:
Resized to 40mm height in slicer with "tree" supports. Most came off while removing from build plate."

GROCKGU 1.stl

***I was asked to do this....it's not my fault*** :P
REMIX

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***ORIGINAL SCULPTS:
Godzilla Sculpt- https://thangs.com/mythangs/file/12223
The Rock- https://bit.ly/3pihWrg
WWE Coaster- https://bit.ly/31kUpOm***
***
If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chaoscoretech

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

#TheRock #Dwayne #Godzilla 

ROCKZILLA

I was asked to do this....it's not my fault :P

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
***
If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chaoscoretech

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

#TheRock #Dwayne #Godzilla 

**Grock**

Another mashup for fans of The Rock.

Remixed from:
1) https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson
&
2) https://www.thingiverse.com/thing:2840339

Size: 128 x 83 x 133 (Scale up or down as you please)

If you would like to support my work, or have access to all of my files you can consider my Patreon! I also tend to drop these models to my Patrons earlier than everywhere else.

https://www.patreon.com/thinair3D

Grock (Groot + The Rock Mashup)

**Grock**

Another mashup for fans of The Rock.

Remixed from:
1) https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson
&
2) https://www.thingiverse.com/thing:2840339

Size: 128 x 83 x 133 (Scale up or down as you please)

If you would like to support my work, or have access to all of my files you can consider my Patreon! I also tend to drop these models to my Patrons earlier than everywhere else.

patreon.com/thinair3D

Hi !

I just mixed a LEGO & the ROCK to create the ULTIMATE LEGOROCK !

====================

Files used :
https://thangs.com/Roboninja/Ironman%20LEGO-44787
and
https://www.thingiverse.com/thing:4960850

====================

- Supports only for the head & the hands
- No special parameters needed
- 107.0mm x 63.8mm x 181.6mm (on the photos)
- ~24 hours of print
- Standard quality : 0.2mm
- Infill : 20%
- Print in place (no assembly)

The LegoROCK

Loki's headpiece to go on your crocs.  

Honestly these were made just for the meme and not for comfort, but then people actually wanted it so here ya go.

Definitely would print in TPU or a flexible filament if you don't wanna stab your ankles.

THESE WERE MADE FOR THE MEME. I REPEAT. FOR THE MEME. (Which means they were derived from my previous Loki headpiece model in about 15 mins lol). If it’s a sucky model don’t hate me.

Loki Croc Attachment

Loki's headpiece to go on your crocs.  

Honestly these were made just for the meme and not for comfort, but then people actually wanted it so here ya go.

Definitely would print in TPU or a flexible filament if you don't wanna stab your ankles.

**_"It's that time of year. Time to hang your MISSILE TOADS!"_**

Inspired by a meme a friend sent to me, I decided to make this into something that could be 3D printed. Thus it was that I spent literally THOUSANDS of seconds scouring the various 3D model repositories to find the components necessary, which are these:

- Colorado River Toad, by PortlandPrints on Thingiverse (https://www.thingiverse.com/thing:3056594); and
- Missile, by Helen_Splitt on Thingiverse (https://www.thingiverse.com/thing:3385035)
    
  
Armed with a missile (and a toad), I wandered into Tinkercad and merged the two of them together. And I added a ring at the top, so you can easily hang it above a doorway.

One of the things I love about 3D printing is that you can go from "Silly Meme" to "Silly Meme You Can Hang Over A Doorway" in a couple of hours. So, here you go. Print this out, and enjoy!

Missile Toad.stl

Check out the Timelapse: https://www.tiktok.com/@robin3dverse/video/7035313484107615493

**Support-Free Mashup of The Rock + T-Rex**

This is a fun support free mashup of Rock and T-Rex

Model: https://thangs.com/ThinAir3D/TyrockasaurusRexstl-37908
https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson

No supports are required anywhere and it can be printed very easily. Check out the 3D print timelapse to see it in action - https://www.tiktok.com/@robin3dverse/video/7035313484107615493

Follow me for more cool, support-free 3d printing designs & timelapses on:

**YouTube:** https://www.youtube.com/robin3dverse
**TikTok:** https://www.tiktok.com/@robin3dverse/
**Instagram**: https://www.instagram.com/robin3dverse/

Print and share your prints on Instagram!
You can credit my remix via **@robin3dverse** and tag me!

-------------------------------------------------
**3D PRINTING SETTINGS**

Timelapse: https://www.tiktok.com/@robin3dverse/video/7035313484107615493

**Print Settings:**
Slicer: Cura 4.9.0
Layer Height: 0.2 mm
Wall Line Count: 3
Infill: 5%, Gyroid
Print Speed: 35 mm/sec
Z-Hop: 0.3 mm
Z-Seam: Back-Left
Supports: No
Raft/Brim: No
Print Time: 3 hrs 47 min

Dimensions: 71.85mm x 53.8mm x 90mm
Weight: 19 grams

This work is licensed under a
Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike

TyROCKasaurusRex Support-Free MashUp

Check out the Timelapse: https://www.tiktok.com/@robin3dverse/video/7035313484107615493

**Support-Free Mashup of The Rock + T-Rex**

This is a fun support free mashup of Rock and T-Rex
Model: https://thangs.com/ThinAir3D/TyrockasaurusRexstl-37908
Original Designer: https://www.thingiverse.com/js-studio/designs

No supports are required anywhere and it can be printed very easily. Check out the 3D print timelapse to see it in action - https://www.tiktok.com/@robin3dverse/video/7035313484107615493

Follow me for more cool, support-free 3d printing designs & timelapses on:

**YouTube:** https://www.youtube.com/robin3dverse
**TikTok:** https://www.tiktok.com/@robin3dverse/
**Instagram**: https://www.instagram.com/robin3dverse/

Print and share your prints on Instagram!
You can credit my remix via **@robin3dverse** and tag me!

-------------------------------------------------
**3D PRINTING SETTINGS**

Timelapse: https://www.tiktok.com/@robin3dverse/video/7035313484107615493

**Print Settings:**
Slicer: Cura 4.9.0
Layer Height: 0.2 mm
Wall Line Count: 3
Infill: 5%, Gyroid
Print Speed: 35 mm/sec
Z-Hop: 0.3 mm
Z-Seam: Back-Left
Supports: No
Raft/Brim: No
Print Time: 3 hrs 47 min

Dimensions: 71.85mm x 53.8mm x 90mm
Weight: 19 grams

This work is licensed under a
Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike

octopus with a Dwayne the rock head with shreck ears

Shrocktopus.stl

well you may know that 3d designers are going creasy  on tiktok with the rock trend. we're making mashups of the rock, and this one is mine, I'm calling it the RocknRock it's basically the rock in a rock, if you didn't get it just print it.  

if you printed this pleas give it a like and tag me on social media:

TIKTOK: https://www.tiktok.com/@pressprint?%C2%B5=&is_copy_url=1&is_from_webapp=v1

IG: https://www.instagram.com/pressprint__/


Remixed from:
-https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson 
-

THE ROCKNROCK

**It's a ROCKetship... Get it?**

This is a silly Retro Futuristic ROCKetship design, just because.  This is my Rocket Holiday Decoration design with "The Rock"'s face on it. Because.  Files include a second version with an eyelet at the top for use as a Christmas Ornament or a Keychain.  

Design inspired by classic retro futuristic rockets and The Rock...

*Measures 83mm Tall x 47mm Wide.*

----------------------------------------------------------------

- **INCLUDED FILES:**
  - CAD STEP File to learn how I designed these.
  - ROCKet V1
  - ROCKet Ornament / Keychain V1

---------------------------------------------------------------

- **PRINT PARAMETERS:** 
  - Supports Recommended Under Fins
  - 2 Perimeters (Walls/Shells) Recommended
  - 10%+ Infill Recommended
  - Scale up as you see fit.

Mine was printed in Inland "Silk Red" PLA

--------------------------------------------------------------

Want to Support what I do? Check out my social medias please!

**Link Tree:** http://www.HotRodHippie.com/links

**Want to Buy a Can Cup?** Check out our "Authorized Sellers" List here: https://www.hotrodhippie.com/resellers

--------------------------------------------------------------

**All of my Designs are covered by a Creative Commons Non-Commercial License.**  Sale of prints using my designs are the sole right of myself, the designer, and those I license to do so. *By downloading this design you are agreeing to these terms.* Please understand every design is hours of work and multiple prototype prints to ensure quality.  Unauthorized sales will result in new designs not being made public.

**PLEASE Credit any and all Remixes of my designs: MandicReally**

ROCKet - Retro Futuristic Decoration

Retro_ROCKet_V1_Rock.stl

Updated GROCKGU - The Rock meets Grogu

Reduced ear size. More proportional to body as requested.

Original - https://social.thangs.com/m/51342

Grockgu - Smaller ears

Updated GROCKGU - The Rock meets Grogu

Reduced ear size

Check out the Timelapse: https://youtu.be/tVNQXFY1VuA

**Support-Free Remix of Dr. Smolder Bravestone from Jumanji (Dwayne Johnson aka The Rock).**

This is a support-free FDM friendly remix of the model by **JS-Studio**
Original Model: https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson/
Original Designer: https://www.thingiverse.com/js-studio/designs

No supports are required anywhere and it can be printed very easily. Check out the 3D print timelapse to see it in action - https://youtu.be/tVNQXFY1VuA

Follow me for more cool, support-free 3d printing designs & timelapses on:

**YouTube:** https://www.youtube.com/robin3dverse

**Instagram**: https://www.instagram.com/robin3dverse/

Print and share your prints on Instagram!
You can credit my remix via **@robin3dverse** and tag me!

-------------------------------------------------
**3D PRINTING SETTINGS**

Timelapse: https://youtu.be/_whmqXrJEXU

**Print Settings:**
Slicer: Cura 4.9.0
Layer Height: 0.2 mm
Wall Line Count: 3
Infill: 8%, Gyroid
Print Speed: 30 mm/sec
Z-Hop: 0.3 mm
Z-Seam: Back-Left
Supports: No
Raft/Brim: No
Print Time: 13 hrs 23 min

Dimensions: 76.38mm x 62.55mm x 185mm
Weight: 64 grams

**Tags**: action, costume, figure, figurine, hero, movie, sculpture, rock, character, sculpt, supportfree, fanart, jungle, Johnson, jumanji, Smolder, Bravestone, Dwayne, therock, supportfree, robin3dverse

This work is licensed under a
Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike

The Rock - Dr. Smolder Bravestone - Support Free Remix

Check out the Timelapse: https://youtu.be/tVNQXFY1VuA

**Support-Free Remix of Dr. Smolder Bravestone from Jumanji (Dwayne Johnson aka The Rock).**

This is a support-free FDM friendly remix of the model by **JS-Studio**
Original Model: https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson/
Original Designer: https://www.thingiverse.com/js-studio/designs

No supports are required anywhere and it can be printed very easily. Check out the 3D print timelapse to see it in action - https://youtu.be/tVNQXFY1VuA

Follow me for more cool, support-free 3d printing designs & timelapses on:

**YouTube:** https://www.youtube.com/robin3dverse

**Instagram**: https://www.instagram.com/robin3dverse/

Print and share your prints on Instagram!
You can credit my remix via **@robin3dverse** and tag me!

-------------------------------------------------
**3D PRINTING SETTINGS**

Timelapse: https://youtu.be/_whmqXrJEXU

**Print Settings:
**Slicer: Cura 4.9.0
Layer Height: 0.2 mm
Wall Line Count: 3
Infill: 8%, Gyroid
Print Speed: 30 mm/sec
Z-Hop: 0.3 mm
Z-Seam: Back-Left
Supports: No
Raft/Brim: No
Print Time: 13 hrs 23 min

Dimensions:	76.38mm x 62.55mm x 185mm
Weight: 64 grams

**Tags**: action, costume, figure, figurine, hero, movie, sculpture, rock, character, sculpt, supportfree, fanart, jungle, Johnson, jumanji, Smolder, Bravestone, Dwayne, therock, supportfree, robin3dverse

This work is licensed under a
Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike

Dr. Smolder Bravestone Support Free Remix

**Support-Free Mashup of The Rock + Goku**
Timelapse: https://www.tiktok.com/@robin3dverse/video/7037689049716493573

This is a fun support-free mashup of Rock and Goku

Original Models:
https://www.thingiverse.com/thing:4971249
https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson

No supports are required anywhere and it can be printed very easily. 

Follow me for more cool, support-free 3d printing designs & timelapses on:

**YouTube:** https://www.youtube.com/robin3dverse
**TikTok:** https://www.tiktok.com/@robin3dverse/
**Instagram**: https://www.instagram.com/robin3dverse/

Print and share your prints on Instagram!
You can credit my remix via **@robin3dverse** and tag me!

-------------------------------------------------
**3D PRINTING SETTINGS**

Timelapse: https://www.tiktok.com/@robin3dverse/video/7037689049716493573

**Print Settings:**

Slicer: Cura 4.9.0
Layer Height: 0.2 mm
Wall Line Count: 3
Infill: 5%, Gyroid
Print Speed: 40 mm/sec
Z-Hop: 0.3 mm
Z-Seam: Back-Left
Supports: No
Raft/Brim: No
Print Time: 6 hrs 7 min

Dimensions: 89.4mm x 46.4mm x 135mm
Weight: 32 grams

This work is licensed under a
Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike

ROCKu Support-Free MashUp

**Support-Free Mashup of The Rock + Goku**

This is a fun support-free mashup of Rock and Goku

Original Models:
https://www.thingiverse.com/thing:4971249
https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson

No supports are required anywhere and it can be printed very easily. 

Follow me for more cool, support-free 3d printing designs & timelapses on:

**YouTube:** https://www.youtube.com/robin3dverse
**TikTok:** https://www.tiktok.com/@robin3dverse/
**Instagram**: https://www.instagram.com/robin3dverse/

Print and share your prints on Instagram!
You can credit my remix via **@robin3dverse** and tag me!

-------------------------------------------------
**3D PRINTING SETTINGS**

**Print Settings:**

Slicer: Cura 4.9.0
Layer Height: 0.2 mm
Wall Line Count: 3
Infill: 5%, Gyroid
Print Speed: 40 mm/sec
Z-Hop: 0.3 mm
Z-Seam: Back-Left
Supports: No
Raft/Brim: No
Print Time: 6 hrs 7 min

Dimensions: 89.4mm x 46.4mm x 135mm
Weight: 32 grams

This work is licensed under a
Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike

Fred The rock (fred the frog + the rock)

Follow the tiktok account:

https://www.tiktok.com/@grizzledgnome?lang=en

Support the creator: paypal.me/grizzledgnome

other links: https://linktr.ee/GrizzledGnome


FREDTHEROCK.stl

Totorock (The Rock + My Neighbor Totoro Mashup) - No Supports Needed

Remixed from:

https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson &
https://www.thingiverse.com/thing:2855260

Size: 118 x 73 x 124

If you would like to support my work, or have access to all of my files you can consider joining my Patreon!

https://www.patreon.com/thinair3D

Totorock (The Rock + My Neighbor Totoro) - Support Free

Totorock (The Rock + My Neighbor Totoro Mashup) - No Supports Needed

Remixed from:

https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson &
https://www.thingiverse.com/thing:2855260

Size: 118 x 73 x 124

If you would like to support my work, or have access to all of my files you can consider joining my Patreon!

patreon.com/thinair3D


Dwayne the slug jhonson

rocktrooper.stl

Throw back to an old classic now....https://thangs.com/mythangs/file/10524
REMIX

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***ORIGINAL Dwayne Sculpt***
The Rock- https://bit.ly/3pihWrg
***
If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chaoscoretech

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

#TheRock #Dwayne #Bernie #BundledUpBernie 

Pop CultureMemes & Trends

Categories

Popular

Personalize

Trending