XYZ_CallibrationCube.stl

This is a small and simple XYZ calibration cube for checking the dimensional accuracy of your printer.   The cube has X, Y and Z written along their respective axes.

Once printed either use an accurate ruler or callipers to measure the dimensions of the print. The original model size is 20mm*20mm*20mm however you may wish to resize it to be bigger (or smaller). 

Once you have measured your dimensions you may want to adjust the steps or steps per mm for each axis in your printers firmware - This may or may not be possible depending on your printer. 

To do this you will need to find your current Steps per mm, and then have your observed dimension and expected dimension.

To calculate the new Steps per mm you will need to do:

(Expected/Observed)*Current Steps per mm = New Steps per mm

It is also good as just giving a gauge of how well your 3D printer works with small over hangs and flat faces to check for Z-Banding or ghosting!

Calibration Fool

Looking for an April Fool’s Day post? Print and post to social media… be sure to tag (and blame!) all your favourite 3D printer and filament brands. Use hashtag #calibrationfool 
See here for video: https://youtube.com/shorts/ii4bMlS8C14 


XYZ Cube Box

XYZ Box.stl

Rounded XYZ Cube

XYZ Cube

Axis Reference - Ender 3 Pro

Are you an utter buffoon like myself, and constantly mixing up your axis when manually moving your printerhead?
Set yourself up with a 3D printed axis reference, to completely remove the thinking part about this equation!

Axisbuddy Tentomon - Ender 3 Pro

Are you an utter buffoon like myself, and constantly mixing up your axis when manually moving your printerhead?
Set yourself up with a 3D printed axis reference, complete with a Tentomon to keep your prints company while you go off and work on your other projects!

Would you prefer to set up a Tentomon for other projects?
Feel free to check out my [cleaned up version](https://social.thangs.com/m/256508), based on the Tentomon model from Digimon Story: Cyber Sleuth

Hinged Calibration Cube Accessories 02

not-printable.stl

🎲 𝙉𝙤𝙩 𝙩𝙝𝙚 𝙪𝙨𝙪𝙖𝙡 𝙘

Calibration Cube_ICPI.stl

🎲 𝙉𝙤𝙩 𝙩𝙝𝙚 𝙪𝙨𝙪𝙖𝙡 𝙘𝙖𝙡𝙞𝙗𝙧𝙖𝙩𝙞𝙤𝙣 𝙘𝙪𝙗𝙚 🎲

My own version of the popular model used to test out printing tolerances, surface quality and to tune up your slicing profiles for every filament change.

This 20mm calibration cube has almost everything you need to check before actually start your prints: overhangs, bridging, retraction, ghosting, stringing, etc.

You can enjoy making it and have an actual cool, original and good-looking cube!

Join the #𝙞𝙘𝙖𝙣𝙥𝙧𝙞𝙣𝙩𝙞𝙩 challenge , show up your printed cube!

Happy printing everyone! 🎲

⸻⸻⸻⸻⸻⸻⸻⸻

Don't be shy, share your make and be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.𝙞𝙩 in your socials!

⸻⸻⸻⸻⸻⸻⸻⸻

𝗜𝗡𝗦𝗧𝗔𝗚𝗥𝗔𝗠 : https://www.instagram.com/randomizy.3d/

𝗖𝗵𝗲𝗰𝗸 𝗠𝗼𝗿𝗲 𝗛𝗲𝗿𝗲 : https://linktr.ee/RandomizY

xyz

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 16 new models

Calibration Fool

XYZ Cube Box

Rounded XYZ Cube

XYZ Cube

Axis Reference - Ender 3 Pro

Axisbuddy Tentomon - Ender 3 Pro

Hinged Calibration Cube Accessories 02

Calibration Cube_ICPI.stl

Hinged Calibration Cube Accessories 01