Wall Mount for Waterpik Flosser Model WP-150

This is a wall mount for the WP-150, the Waterpik brand flosser. it keeps my unit off the bathroom counter and manages the excess cord.
I always remember to floss when I do not have to plug anything in or pull this thing off a shelf. It's just ready to go.

I designed this wall mount as my first project ever in fusion 360, to learn the software, so please understand I am sure it could be much better. any feedback is much appreciated.

I recommend printing it with 10-15% infill, at least 3 walls and 3 top and bottom shells
I used cubic infill and PLA+
I printed mine at 0.3mm just to save time. 

The screwholes are made for standard drywall screws, something I have a million of. You may want to edit them if you have a special screw you want to use, but its a big enough hole for a lot of common screws and you don't need to worry about them sitting flush anyway. They aren't visible when the unit is in place and the extra 'texture' will help keep your extra cord in place.

When inserting the unit, feed the power cord through your desired exit hole *first*, and don't be afraid to kinda manhandle the wall mount to get the unit into place. You will need to flex the wall mount a little so that where the power cord exits the unit will clear part of the wall. Just force it (flexing the 3d print, not your flosser unit), you wont hurt anything, and the unit is even more snug for it. then align the holes on the underside with the pegs and it should drop right into place.

Please let me know if it could be improved in anyway.

waterpik

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Wall Mount for Waterpik Flosser Model WP-150