Hextraction Portal Tile: Special RMRRF 2023 Edition!

Portal Tile Out Special Edition.stl

Hextraction Beta FORBIDDEN TILE

This tile was designed for a single shot of the video and never designed to be printed. It's forbidden because it allows a ball to move from an upper slot to another upper slot, or from a lower slot to another slot. Make sure to build up some momentum!

Remix of Zack's Head (w/ man bun)

Zack Freedman, world-famous YouTube nobody, scanned his head with Polycam to build the Optigon 2 wearable computer. Now you can use his notoriously natty noggin for your nefarious non-nude needs.

For the raw file with textures and stuff, visit https://poly.cam/capture/B0EB3BED-38F8-424B-B699-46D6D31DCEF4

Part of this video: // todo add video

That's ZACK with a K, and FREEDMAN with two E's and a D.

Zack Freedman with a Man Bun

 Zack's Head as Santa Claus

Zacktopus - Remix of Zack's Head (w/ man bun)

Remix of Zack's Head (w/ man bun) Xmas Robot Santa Remix

Zack's Head Ornament

Remix of Zack's Head as a nut bowl

MagSafe Phone Dock.stl

Keep an eye on your VERY important notifications while topping up your battery! This phone charger fits the Gridfinity modular storage system, and is designed to hold [a particularly powerful Qi wireless charger](https://www.amazon.com/dp/B09HBFNQBR?psc=1&ref=ppx_yo2ov_dt_b_product_details). I designed it for my iPhone 14, but it should fit nearly any phone, even in an EXTRA THICC case.

To prevent damage, the adapter DOES NOT friction-fit. You will need a thin double-sided tape like carpet tape, or a removable adhesive like E6000.

Magnets or screws are VERY STRONGLY RECOMMENDED! Your phone wants to faceplant. It was born to die.

Fusion source: https://a360.co/3uoOinb

Gridfinity is the ultimate organizer for your whole workshop! Learn more at

Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Gridfinity Tips!

All storage blocks are compatible with all baseplates!
You can add [6x2mm magnets](https://amzn.to/3UuuJV9) to the corners!
You can also use [M3 screws](https://amzn.to/3VRrS9T) to secure the corners.

Gridfinity Miniware DT71 Charger and Dock

The [Miniware DT71](https://amzn.to/3gWPueo) is a full-featured multimeter in a pair of tweezers. Problem: You have to disassemble it to charge it, and it doesn't stand upright in a 42mm³ grid.

Restore order to the Universe with this handy dock. It holds the DT71 assembled or stripped, as well as spare probes. The USB adapter is positioned to use while docked, or stashed safely, with the USB port exposed for charging.

Magnets or screws are VERY STRONGLY RECOMMENDED! Your new tweezers will fall like an old geezer!

Fusion source: https://a360.co/3Urqgm1

Gridfinity is the ultimate organizer for your whole workshop! Learn more at

Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Gridfinity Tips!

All storage blocks are compatible with all baseplates!
You can add [6x2mm magnets](https://amzn.to/3UuuJV9) to the corners!
You can also use [M3 screws](https://amzn.to/3VRrS9T) to secure the corners.

Gridfinity Hakko 599B Holder

The perfect way to stash the sturdy and inexpensive [Hakko 599B brass tip cleaner](https://amzn.to/3XTwi1Q) on your favorite Gridfinity baseplate. Combine with a soldering stand and wire dispenser for a full soldering station!

To assemble, first remove the feet from the 599B's base to expose the three holes. Insert into the recess so the pegs mate with the holes. For a permanent fit, peen the pegs over with a soldering iron or other hot thingy.

Magnets or screws are VERY STRONGLY RECOMMENDED! You don't want to spill solder dust all over your project!!

Directions:
1. Print one Main Unit and two Sili-Jar Holders from any rigid filament.
2. Take one of the silicone jars apart. Put the lid on the small dish atop the Main Unit to create a screw holder.
3. Cut an X in the bottom of the jar and mount it to a Jar Holder. It will fit snugly in the recessed rim.
4. Take another jar apart and discard the lid. 
5. Completely cut out the floor of the jar bottom and mount to the other Jar Holder.
6. Glue the Jar Holders to the Main Unit. The X goes in the high position and the other goes in the lower position. The floor of both jars face upward.
7. ADD MAGNETS OR SCREWS!!
8. Solder.

Magnets or screws are mandatory for safety. A baseplate is integrated into the stand for more surface area and to manage the center of gravity.

Gridfinity is the ultimate organizer for your whole workshop! Learn more at

Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Fusion source file: https://a360.co/3Vuk7H6

Gridfinity Tips!

All storage blocks are compatible with all baseplates!
You can add [6x2mm magnets](https://amzn.to/3UuuJV9) to the corners!
You can also use [M3 screws](https://amzn.to/3VRrS9T) to secure the corners.

Gridfinity SD Card Rolodex Mod

Upgrade the [SD Card Holder Rolodex by Tetralite](http://bit.ly/3H576PQ) for Gridfinity! Print Tetralite's model as normal, but print this instead of their framebase.stl.

Fills 2x3 units and extends a bit beyond the grid, but works great!

Gridfinity is the ultimate organizer for your whole workshop! Learn more at

Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Fusion source file: https://a360.co/3iECsCH

Gridfinity Tips!

All storage blocks are compatible with all baseplates!
You can add [6x2mm magnets](https://amzn.to/3UuuJV9) to the corners!
You can also use [M3 screws](https://amzn.to/3VRrS9T) to secure the corners.

voidstar lab

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Hextraction Portal Tile: Special RMRRF 2023 Edition!

Hextraction Beta FORBIDDEN TILE

Remix of Zack's Head (w/ man bun)

Zack's Head as Santa Claus

Zacktopus - Remix of Zack's Head (w/ man bun)

Remix of Zack's Head (w/ man bun) Xmas Robot Santa Remix

Zack's Head Ornament

View 25 new models

MagSafe Phone Dock.stl

Gridfinity Miniware DT71 Charger and Dock

Gridfinity Hakko 599B Holder

Gridfinity SD Card Rolodex Mod

Optigon Behind-the-Neck Frame (Wearable display mod kit)

Optigon 2 HMD Frame: Moverio BT-40 Mod

Zack's Head (w/ man bun)

Fabric-Mount Raspberry Pi 3B+ and Codec Zero Enclosure

Hoodie-Mounted Wearable Display