GoPro Hero Timelapse Mount for Creality CR-6 SE & CR-10 MAX  

**Bill of Materials**

**Rail Mount**

- 2 x Orginial Creality Glasbed Holders (the metal part)
- 12 mm Aluminium Pipe / Rod cut to 24,5 cm length
- 6 x M3 Hex Nuts 
- 6 x M3 Screws 16mm

**GoPro Holder**

- 2 x M3 Square Nuts 
- 2 x M3 Screws 18mm
- 2 x M5 Squarenuts

**Print Settings**

- PLA Filament (Prusament)
- Print Temp: 215°C First Layer / 210°C 2nd Layer onward
- Perimeters: 4
- Infill: 25%
- Add two Print Pauses at the appropriate layer to insert the hex nuts and square nuts

Check out my YouTube Video for more details: https://youtu.be/tWTiiH9B7a0

License Type = CC BY-NC-SA
(CC Attribution-NonCommercial-ShareAlike)

CR6-SE-Bed_TimelapseRailHolder.stl

Skyscraper.glb

Ender 3 S1 motherboard cover 80mm fan

New to Onshape and making 3d models, so it's pretty basic but this allowed me to put a Noctua NF-A8 FLX 80x80x25mm fan right below the motherboard, I didn't see how the other ender 3 ones could work. Holes might be a little small depending on how your mounting, i used rubber mounts they include in the box, had to drill them a hair, its a stretch but they do fit. Also i didn't see an easy spot to bolt the rear of it to, so its just the front screw and side one. My first attempt was designed upside down so I had to mirror it and reprint, the pics are of the 1st print for those wondering. Step file included for those more talented than me.

Ender 3 Pro Filament Guide Rev1.0

**My first ever CAD design, and self designed 3d print.**
I created this as I was having issues with the filamant location causing the filament to bend too far and bind. This reduces the angle as it enters the feed motor, reducing load and slippage.

 It is not optimized for overhangs, as I don't know how yet, so support material is a must! 
I use a 50% infill to reduce plastic waste, since this part is not under alot of load.
Prints, easily direct to bed, with no skirt, brim, or raft.

Knob.SLDPRT

Knob , you can resize it to make it fit with your switch. 
 Using solidwork 

wook kiss sculpture（scanned by Revopoint POP 2）

ButterDishCover.SLDPRT

This is a cover (lid) designed for a butter dish. It can be placed onto the dish into its grooves over any items that need to be protected from dust, flies, etc. 
The thickness of the cover is 3mm.
Dimensions: 146 x 91 x 83.6 mm
CAD Files for the butter dish can be found in my account.

Brick Block Box (OpenSCAD)

Demo Blocks.3mf

car rim.STL

Diatone Q33 insta360 GO minimal camera mount

This is a minimalistic insta360-GO camera mount for the Diatone Q33 tiny RC cars. It is a combination of minimicroFPV's design (https://www.thingiverse.com/thing:4317063) and Diatone's 3D file.
I printed it in TPU and screwed it onto the canopy of the car with truss screws (make sure you use screws with very slim head, otherwise it will touch the battery and push the motor cover - which can make the motor bind).

More info and 3D printing footage in this video: (coming soon)
Disassembly video can be found here:

Here is how you can easily modify this (and any other) design in Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM

@ Share and leave a tip if you liked this design! https://www.mutefpv.com/paypal @

PORTA CANETAS.SLDPRT

Bentley 3D logo

Bentley Logo.STEP

gopro_9_v4.stl

dummy_gopro_body.stl

Impossible Triangle Wall Art

I made an impossible Triangle in SolveSpace and extruded it for 3D printed wall art.

Degbit ‎EOS 100 bike light reflector lens

I lost the reflector from my bike light. The reflector keeps out water, and also ensures that the light points forward while also using the case as a heat-sink.

Printed with Prusa MK3S+

- Print with the bottom down, using base-plate supports only.
- Glue a piece of aluminium foil onto the slope as a reflective surface.
- Glue a piece of acrylic or other clear plastic to use as a lens cover. 
- Use thermal paste to connect the LED PCB to the casing
- I recommend gluing around the edge a little, to improve water-resistance



Micro Camera Shelf

A small shelf for webcams that have a tripod screw thread. I use it to have my webcam stuck on the side of m enclosure for octolapses

BULE.SLDPRT

MINI SUPORTE CELULAR.SLDPRT

Troy Lee Designs GoPro Chin mount

Simple chin mount for TLD Stage helmet. No Supports needed. Recommend using thin foam between mount and chin bar to prevent rubbing and vibrations.

visual art & design

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

GoPro Hero Timelapse Mount for Creality CR-6 SE & CR-10 MAX

Skyscraper.glb

Ender 3 S1 motherboard cover 80mm fan

Ender 3 Pro Filament Guide Rev1.0

Knob.SLDPRT

wook kiss sculpture（scanned by Revopoint POP 2）

View 12 new models

View 20 new models

car rim.STL

Diatone Q33 insta360 GO minimal camera mount

PORTA CANETAS.SLDPRT

Bentley 3D logo

gopro_9_v4.stl

dummy_gopro_body.stl

Impossible Triangle Wall Art

Degbit ‎EOS 100 bike light reflector lens

Micro Camera Shelf

BULE.SLDPRT

MINI SUPORTE CELULAR.SLDPRT

Troy Lee Designs GoPro Chin mount