Risers for LACK by IKEA - Standard.stl

Like many 3D printing hobbyists, I place one of my 3D printers on the LACK side table by IKEA. These risers will raise the table by 10 cm.

Note: A clearance of 1.5mm was included as I found the legs of LACK to have some irregularities.

I've also uploaded the standard (single leg) version and a tall version.
Standard Version: https://thangs.com/model/43817
Tall Version: https://thangs.com/model/43849
Dual Version: https://thangs.com/model/43850



**RECOMMENDED PRINT SETTINGS**
Brim or Raft: No
Supports: No
Orientation: Standing up
Layer Height: 0.2mm
Nozzle Size: 0.2mm
Material: PLA or ABS




**Learn Fusion 360:** https://ProductDesignOnline.com

**PDO YouTube:** https://www.youtube.com/productdesignonline

**3D Modeling Challenges:** https://productdesignonline.com/challenge



This model was created by Kevin Kennedy (Product Design Online) and is work licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. To view a copy of this license, visit: http://creativecommons.org/licenses/by-nc-sa/4.0/

golden scarab - moon knight

pre-painted 3mf files for bambulab users.

Gridfinity Parametric Wall Control Baseplates

5x4 Baseplate.3mf

2x2x0.5 CU - Simple Walls - Multibin Shell

2x2x0.5, No Lock Holes, Multigrid Bin.stl

Build A Flexi - Flexi Builder Free Sample Pack

BABY BONE DRAGON 002 KEYCHAIN SAMPLE.stl

Platypus Multiple Joint Fidget

PlatypusMultiJointFidget.stl

Chunky Thor - Marvel Kit | No Supports, No AMS, No Glue

Plate 6 - Earth Brown.stl

150 mm Peg (Bolt-Locked Double Insert)

150 mm Peg (Bolt-Locked Double Insert).stl

Articulated Caterpillar – A Wiggly, Wobbly Print! 

Pre-colored  caterpillar.3mf

Hextraction Reroute Tiles

Devil-Tile.stl

Ornamental Egg (Voronoi)

An ornamental egg with a Voronoi pattern.

Prints without supports

Full Auto Rubber Band SMG

RubberBandBullpup v59.stl

Raspberry Pi 4 Case.stl

Raspberry Pi 4 Case, split into two and ready for 3D printing. Note this was designed with PETG or Nylon 3D printing in mind. Printing with PLA or ABS will likely break the snap-fit connectors.



Cute Dragon 1.stl

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/minishev

Patrons have access to all my files in one place, supported miniatures, a request board, as well as commercial options! Come check it out :-)

MCM Incense Fireplace

Base.stl

Gridfinity 2x1 Phone Stand - No Supports Needed

This is a no-frills, no-nonsense phone stand for the Gridfinity system. It does not require supports. It will probably fit your phone - it fits a OnePlus 7 Pro just fine. There is a slot for a charger on both sides, if you're into that sort of thing.

It's not too pretty but it will make your phone stand up, and it fits with #Gridfinity so print one out if you want. I recommend these settings:

Layer height: .24 - .32
Infill: 10% - 20%
Walls: 3
Top / Bottom layers: 3

v

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Risers for LACK by IKEA - Standard.stl

golden scarab - moon knight

Gridfinity Parametric Wall Control Baseplates

2x2x0.5 CU - Simple Walls - Multibin Shell

Build A Flexi - Flexi Builder Free Sample Pack

Platypus Multiple Joint Fidget

Chunky Thor - Marvel Kit | No Supports, No AMS, No Glue

150 mm Peg (Bolt-Locked Double Insert)

Articulated Caterpillar – A Wiggly, Wobbly Print!

Hextraction Reroute Tiles

Ornamental Egg (Voronoi)

Full Auto Rubber Band SMG

Raspberry Pi 4 Case.stl

Cute Dragon 1.stl

MCM Incense Fireplace

Gridfinity 2x1 Phone Stand - No Supports Needed

Ender 3V2 Hotend Fan Cover Housing Duct

8 mm, Big Thread Hole, Nut

Baby Whale Shark (Articulated)

Phone Stand