Chronowing (free)

Supported_Chronowing.stl

Free Plague Guard

PlagueSoldier_Free.stl

Flight String Artwork

Flight 0.24 Complete.stl

Revan’s Print-in-Place Collapsing Lightsaber

REVAN-PNP.stl

The Erno Planter Pot with Drainage Tray & Stand | Modern and Unique Home Decor for Plants

ERNOPOT.stl

Laughing Skulls Dice Tower

Laughing Skulls.3mf

Cat with Bowl

At its current size, it can hold a small air plant but can be sized up to hold a larger plant or other items! Easy to print with no supports needed!

kirby sanchez complete.stl

Kirby snachez 😍 this one is a fusion of my two favorite characters: Rick Sanchez from Rick and Morty, and Kirby from the Kirby series.

I've always been a huge fan of both characters, and I wanted to create something that combined their unique personalities and design elements. The result is a fun and quirky 3D model that I think you're going to love.

this model can only be printed in a single color, for those who prefer multicolor printing, there's a multipart version available on my Patreon page at:  https://www.patreon.com/pressprint

happy printing.


Star Christmas Tree Ornament

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**WHAT IS IT?**
This is a fun Christmas tree ornament that would also make a fun suncatcher if it's printed with transparent filament. It's reminiscent of a cross, a star (it actually has 8 points), classical western architecture, and more. Using my settings, it's a nice weight at 100% and extremely light at 75% and smaller.

**EASY PRINT**
If you use my settings, you shouldn't have any problems getting this to print. If you print this with your printer's default settings, you'll get a paperweight with a mushy top.

**RESIZING**
At 100%, the ornament is a nice size for larger trees – especially for the base of the tree where you'd expect larger ornaments. However, you can scale this down to 50% and still get nice prints. At that size, the ornament looks good on miniature trees. I haven't tried printing it larger than 100%.

**PRINT TIME**
With my settings, it will take about 4.5 hours to print at 100% scale. At 50%, it takes a little over an hour.

**COLOR-CHANGE PLA**
I used TTYT3D's quick color change PLA. If you print one ornament with it at 100% with it, you'll get a subtle color change. For a more dramatic change, like in the size comparison photo, print several ornaments at once. To go all the way from gold to blue, you'll need the estimated print weight to be at least 75 grams (4 ornaments at 100%).

**HOW DO YOU HANG IT?**
I've concealed attachment points one the back of one of the points of the star. Just tie a piece of coat thread to them to create a loop.

**PRINT SETTINGS**
You'll generally want to print this at the lower end of your PLA's temperature range. I print TTYT3D PLA at 180 degrees, which is well below their recommended temperature. Maybe my printer just runs hot, but that temp prints more accurately with less stringing.

*Thickness*

* Layer thickness: .15mm
* Wall thickness: 0.4mm and choose the “alternate extra wall” option so it alternates between 0.4 and 0.8mm walls with each layer (if you're using Cura – other slicers may not have this option). The alternate extra wall seems to prevent gaps in the print while minimizing the overall weight of the ornament. If you print below 75% scale, I suggest printing at 0.4mm without the alternate extra wall. I would also print without the alternate extra layer if you're using transparent filament.
* Top/bottom thickness: 2 layers for opaque filament, 1 for transparent filament
* Initial bottom thickness: 3 layers

*Infill*
This doesn't need any infill. Seriously.

*Speed*
You'll want to use slow printer settings to that the print is accurate and to reduce the pull on the thin arms of the topper.

* Overall: 60mm/s
* Outer wall: 40mm/s
* Inner wall: 50mm/s
* Travel Speed: 100mm/sec

*Build Plate Adhesion*
I printed with just a skirt and it worked well every time. If you have difficulty getting the details of the first layer to adhere to your bed, try adding a raft.

*Supports*
I added supports to get the outer points of the ornament to print better, but you can do without them. The supports I added made little difference in print time or the amount of filament used. I found that adding supports on the side with the attachment points (for strings) was problematic (attachment points broke before supports separated) and unnecessary (model printed fine without the supports). So, I added a support blocker to that corner. Support settings:

* Placement: touching Buildplate
* Overhang: 69 degrees
* Pattern: Lines
* Density: 12%
* Enable Support Brim: Yes
* Brim Width: 4mm

*Common Problems*
* Uneven print: Reduce print speed or try scaling the print up in the Z dimension only. Scaling disproportionately may impact how the ornament hangs.
* Mushy print: Reduce print temp, increase cooling, or print more than one ornament at a time. 

Smoliv (Pokémon)

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpts By @ChelsC423***
_Brand new Generation 9 Pokémon!_

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

***If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chaoscoretech***

Screen stylus (remix)

I have a small touchscreen and am using Marlin 2.x. The screen I have is not very responsive and found a stylus works pretty well (https://www.thingiverse.com/thing:4493887/filesl. I downloaded the stylus then made a mount that slides into the rail. 

Caterpie (Pokemon)

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by Garrett***
***
If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chaoscoretech

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

caterpie.stl

Among Us Crewmate + Swappable Hats!

Crewmate_figure.stl

Franken Duck

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpted by @ChelsC423
This was one of the Sculptober 2020 Models, if you want to check out Sculptober 2021 become a Patron for October to be a part of the fun!!***
***
If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chaoscoretech

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

u

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Chronowing (free)

Free Plague Guard

Flight String Artwork

Revan’s Print-in-Place Collapsing Lightsaber

The Erno Planter Pot with Drainage Tray & Stand | Modern and Unique Home Decor for Plants

Laughing Skulls Dice Tower

Cat with Bowl

kirby sanchez complete.stl

Star Christmas Tree Ornament

Smoliv (Pokémon)

Screen stylus (remix)

Caterpie (Pokemon)

Among Us Crewmate + Swappable Hats!

Franken Duck

X WING

Tiered Pen Holder Wide Version

1 MU - L Multiboard Beam

Ona Vase

Mystical Cat Seer – Black Cat Wizard Sculpture

5 MU L - Multiboard Hinge Beam