Apple 4K TV Mount

This is a mount for the newest version of the Apple TV.  I designed this to be mounted 3 different ways.

1. Directly to the wall with anchors and screws.

2. If the TV is not all mounted the apple tv mount screw hows are big enough that they should accept most hardware that is designed to work with TV mounts and you can use the existing threaded holes on the back of the TV.

3. Or you can just slap some double-sided tape on it and stick it right to the back of the TV.

This a relatively quick print @ 2 hours and only uses 46g of Filament.



Please remember to give credit when listing this item on any online outlet where you use the model:

"Model courtesy of 3D Design Bros"

**You are not authorized to use our pictures**

Thanks so much for the support.

Mecanismo para pantalla de proyector

Pin.STL

OPTOMA UHD50 Projector Ceiling Mount

Projector_Mount.stl

Sony TV remote holder for RMF-TX310U or similar

Holder for Sony TV remote.  Designed a holder for my Sony X900F TV remote. Works with other similar Sony TV remotes.

Sony TV remote holder

Ceiling projector/beamer mount (compatible with Viewsonic PX701HD)

BeamerMount-topmount.stl

speaker_deflector

Most flat panel TVs have the speakers on the bottom and the sound is directed downwards then in all directions. This deflector directs the sound towards the viewer increasing clarity. People like me that wear hearing aids this really helps. Prints with no supports and can be mounted to the TV using foam double sided tape.


Outdoor PVC Projector Stand V2

Projector Mount v16.3mf

Blind cover half element (Simon 27 Play Compatible)

For a few days the HDMI cable did not work well, it had a direct cable from the projector to the computer and in the end it broke completely.
In order not to install new parts, I used a Simon 27 plug from the ones I had on the wall to put an HDMI connector occupying half the space. Now I have a long cable from the projector to this element and a shorter one from the wall to the computer.
If the cable breaks again, it will only be necessary to change the short.
I didn't need another element and there was no way to find a cover for the other half, so I measured the structure of the HDMI element to make a compatible cover.
I designed it using SketchUp3D and after some testing the final version fits pretty well.
I hope you find it useful.

HDTV Antenna (OTA DTV)

DLP Pico Projector Lens Adapter (1).stl

I wanted to add a lens to my Pico Projector, so I got out my calipers, a few minutes in Tinkercad, and bingo! This M55 wide-angle lens adapter can slip onto a DLP Pico Projector to increase the throw and image. I also put some foam shims on it to provide a firm friction fit, but still, make it easy to remove without scratching the projector.

Projector wall mount.stl

Projector wall mount with adjustable sway braces the design is open for rework and callabs please credit me for any remix 

tv & video equipment

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Apple 4K TV Mount

Mecanismo para pantalla de proyector

OPTOMA UHD50 Projector Ceiling Mount

Sony TV remote holder for RMF-TX310U or similar

Ceiling projector/beamer mount (compatible with Viewsonic PX701HD)

speaker_deflector

Outdoor PVC Projector Stand V2

Blind cover half element (Simon 27 Play Compatible)

HDTV Antenna (OTA DTV)

DLP Pico Projector Lens Adapter (1).stl

Projector wall mount.stl

Vizio Soundbar Supports