ZUG | trifold paper towel dispenser

ZUG_towel-dispenser_Box-Wall-hanging_L300.stl

Paper Towel Holder Style 4

Paper Towel Holder Style 4 Large_STL.stl

RYGGA - Paper towel holder - Kitchen roll holder

RYGGA - Paper Towel Holder - US version - Flowalistik Studio.3mf

Hooks for Adhesive Wall Mounting

Hooks__adhesive rectangle.3mf

Paper towel holder

110_260.3mf

Paper Towel Holder Style 1

Paper Towel Holder Style 1 Large.STEP

Paper Towel Holder Style 3

Paper Towel Holder Style 3 Large_STL.stl

Paper Towel Holder Style 2

Paper Towel Holder Large Style 2_STL.stl

Simple Coat/Towel Hook

Simple Hook_10mm_Hook.stl

IKEA Skadis Hack –Cleaning Set Holder

Skadis Cleaning Set_BAMBULAB.3mf

Christmas Paper Towel Holder

PaperTowelHolder_EniNiDesign.stl

Kitchen Roll or Paper Towel Holder - 2 Heights

TowelHolder-280mm.stl

MYTOWEL hook

towel_HOOK_3.stl

MYTOWEL flat clips

towel_star.stl

MYTOWEL clips 

towel_CYL_plus.stl

Gridfinity | Paper Towel Roll

A 3x3x32cm Paper Towel Roll holder for your  Gridfinity arrangement.

Suggest standard profiles with 25%-50% infill. There is a thicc area at the bottom of the dowel for increased strength.

Gridfinity concept by Zack Freedman

Cloth bowl

**A cloth-resembling bowl intended as decorative storage of small things.**
It is based on a 3d-scan that took me a long time to get done and optimized for printing.

**Scaling / size**
- Upscaling (100% +): as big as you want
- Regular size (100%): 210 x 210 x 49 mm 
- Downscaling (99% – 61%): works great
- Minimum size (60%):  126 x 126 x 30 mm
- Everything smaller than that will probably result in brittle features


**Print settings**
Material usage: 240g
Print time: 16h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

Cloth / towel hock Anchor - Kleiderhaken Anker

Anchor_hook.stl

Towel hanger

Let’s be honest, who is really taking the time to spread out a kitchen towel tidy over a bar? And If you are using a hook - it is often a struggle to find the loop and the towel is probably still wet after a few hours.
This simple and well working solution is a mix between the two options. Just throw the towel over and don’t worry about it not drying or falling down.
 
You can either screw or glue it onto your wall or cabinet. There are various glue or tape products for wall fixation out there. I used 3M Tape.

Diameter of the two screw holes: 5,5mm

Size: ca 175 × 75 × 50 mm
Don't forget to post your makes!

**Print settings**
Required build volume: 180 x 180 x 60 mm
Material usage: 40g
Print time: 4h – 5h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0,28 mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

Clothespin With Hook

clothespin-hook_v1.stl

towel

Trending this Week

Categories

Trending

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

ZUG | trifold paper towel dispenser

Paper Towel Holder Style 4

RYGGA - Paper towel holder - Kitchen roll holder

Hooks for Adhesive Wall Mounting

Paper towel holder

Paper Towel Holder Style 1

Paper Towel Holder Style 3

Paper Towel Holder Style 2

Simple Coat/Towel Hook

IKEA Skadis Hack –Cleaning Set Holder

Christmas Paper Towel Holder

Kitchen Roll or Paper Towel Holder - 2 Heights

MYTOWEL hook

MYTOWEL flat clips

MYTOWEL clips

Gridfinity | Paper Towel Roll

Cloth bowl

Cloth / towel hock Anchor - Kleiderhaken Anker

Towel hanger

Clothespin With Hook