Towel hanger

Let’s be honest, who is really taking the time to spread out a kitchen towel tidy over a bar? And If you are using a hook - it is often a struggle to find the loop and the towel is probably still wet after a few hours.
This simple and well working solution is a mix between the two options. Just throw the towel over and don’t worry about it not drying or falling down.
 
You can either screw or glue it onto your wall or cabinet. There are various glue or tape products for wall fixation out there. I used 3M Tape.

Diameter of the two screw holes: 5,5mm

Size: ca 175 × 75 × 50 mm
Don't forget to post your makes!

**Print settings**
Required build volume: 180 x 180 x 60 mm
Material usage: 40g
Print time: 4h – 5h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0,28 mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

Dish Towel Hanger

A quick 5 minute print that lets you hang up tea towels without loops



towel hanger

Trending this Week

Categories

Trending

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Towel hanger

Dish Towel Hanger

bathroom towel bar adapter