crumpled tin can pot (NO SUPPORT)

big.stl

Bar Keepers Friend Lid - Airtight Seal - BKF (Barkeepers) Can / Tin - JCreateNZ

BKF Bottom - No Tab.stl

mini bucket

bucket.stl

Tin Can

can-thewhatbrandsg.stl

Altoids Tin Organizers

Altoids Tin Organizer 1.stl

Heinz Bean Tin Can Stacker

BEAN.step

Super Mushroom Container

container bottom white.stl

Soldering wire stand (Print in place)

Really proud of this one. Soldering wire stand with print in place hinge and metal shaft slid into a hole. supports most sizes of soldering wire spools, many spools can be installed at once. If you want to access the spools, just lift the metal shaft up. If a small wire spool is installed, there is always more room for insulation tape, scotch tape etc
it works incredibly smoothly and is very strong. the bottom of the stand is corrugated so it grips nicely to a rough desk but there are also round holes for rubber pads.
The middle section has all the main lead exposure health hazards noted down for when you'll inevitably forget about them from all the lead fumes you have been inhaling. The sides have tin and lead elements decals.

_The model is supposed to be printed laying down with the hinge's shaft touching the build plate. The orientation here is very important so that the hinge works properly. I printed mine with .6mm nozzle at .14mm layer height and 10% infill. it's very strong and the letters & decals and perfectly readable. No brim and only one support for the shaft slot on the left side.
After printing, a ~10cm long, 10mm wide shaft is supposed to be pushed into the hole above the hinge. If you dont have a metal shaft, you can always 3d print one though it wont look as neat._

Plastic Wrap / Tin Foil Holder

plastic wrap holder v1.stl

Decorative box hinged

Fancy box

Maruchan Instant Lunch Ramen STASH CUP! WHAT??? #FunctionalArt #3DPrintBunny

MARUCHAN CUP O NOODLES - CUP WITH EMBOSSED LOGOS FOR MMU.stl

zoids pencil holder1.stl

This is a pencil holder with a zoids logo on it. Please like and share.

Altoids tin micro sd card holder

simple design that clips under the lip of a Altoids can. Gives you spots for 30 micro SD cards and tons of extra space for everyday life.

A Whole-Ass Pie Earrings

Pie.stl

tin

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 20 new models

Bar Keepers Friend Lid - Airtight Seal - BKF (Barkeepers) Can / Tin - JCreateNZ

mini bucket

Tin Can

Altoids Tin Organizers

Heinz Bean Tin Can Stacker

Super Mushroom Container

Soldering wire stand (Print in place)

Plastic Wrap / Tin Foil Holder

Decorative box hinged

Fancy box

Maruchan Instant Lunch Ramen STASH CUP! WHAT??? #FunctionalArt #3DPrintBunny

zoids pencil holder1.stl

Altoids tin micro sd card holder

View 19 new models