Ripple Benchy - Test Print

RippleBenchy.stl

Xeno Benchy - Printer Calibration No Supports

XenoBenchySTL.stl

Magnet Test 

Magnet Test!_.stl

Bearded Gnome

BeardedGnome.stl

Gridfinity Ikea Alex Drawer - Light Locking Base - 10x7 Grid

GridfinityBaseplate - IkeaAlexTall - 10x7 - Bottom Left.stl

Escapement Demo FREE

Escapement Fidget (v8~recovered)_Escapement Fidget (v8~recovered)_Spur Gear (74 teeth)_1_Body1.stl

FuzzyRing (Easy Print .3mf) - Fuzzy Skin Sample *by RNDM3D*

FuzzyRing_0.8_v1.0_PRECONFIG.3mf

Calistar (formerly Fleur de Cali) - Open source printer size and skew calibration

calistar_120x3.stl

12 Segment MMU12x Test Ring

This is a quick and easy test object for the 12 color changing MMU12x. Just load it into your slicer, right click, and split it into [art to be able to color them individually.

2:1 GEAR RATIO TOLERANCE TEST PRINT

Spur Gear (32 teeth).stl

Torture Calibration Test

Mini Test Cube

TPU Mustache Stick Man - TPU and PLA Test Print

This stick man is a remixed version of our original TPU stick man, only this one... has a mustache! (and a hat) [Here is a link to the original stick man](https://thangs.com/designer/DR%203D/3d-model/TPU%20Stickfigure%20-%20TPU%20Test%20Print-879130?manualModelView=true&source=All+Files). 
This print is a good way to test your TPU. After the stickman prints, you can color in the eyes and the mustache to give it some pop.
If you like this model, you know what to do... hit that like button!
Make sure to follow us so you get notified when we upload a new model!
Find us on Printables [here](https://www.printables.com/@DR3D_20233D)
Find us on Instagram [here](https://www.instagram.com/dr_3d2023/)

Testlement

Testlements are small, simple test prints that are great for showing off your filament collection. (Named after their likeness to battlements and being test prints) Testlements are designed to use only a few grams of filament, making them economical and eco-friendly. They are also easy to print, requiring no supports or rafts. You can print Testlements in different sizes, colors, and materials, mix and match them, and even pop them together in groups (as shown in pics). 
Testlements are fun and useful test prints that let you test your 3D printer settings and showcase your filament choices. (Making them Great for showcasing filament choices for prints on places like Etsy) Try them today and see how they can transform your 3D printing experience.

Calibration Measurements:
20 mm wide and long (at its largest points)
22 mm tall

Print Settings:
.1 mm layer height
no supports


Test Bridge

FabbEgg - The threaded surprise egg, that is easy to print, and SOOOOOO satisfying.

Fab Egg - Surpise Egg Full Model.stl

chess.stl

This is a **chess pawn** I made myself in blender. You can use this as a **test print** for your 3D-printer or just print this for fun.

thangs valentine's day contest I heart benchy love lock

benchy_lock_complete.stl

XYZ Calibration Test - Vase Mode

Quick 10 minute print - 0.3 m of filament

Don't waste your precious time and filament printing a so called “calibration cube”!

This quick print provides clues for all the important features and settings:

Extrusion width
E-steps / rotation distance (X, Y, Z)
Bridging
Cooling
Overhangs
Speed / accelleration
First layer / bed adhesion
Retraction (stringing test, seam test)
Preassure advance / linear advance
Print Settings
1 perimeter
0.2 mm layer hight
3 bottom layers
Disable “Ensure vertical shell thickness” (PrusaSlicer)
No Infill, top layers, brim or supports

**Troubleshooting**
https://www.reddit.com/r/3Dprinting/wiki/troubleshootingandcalibration

Some quick tipps:

_**Extrusion width**_
Check if the thickness of one of the outside walls at the top matches the setting in your silcer
**_E-steps / rotation distance (X, Y, Z)_**
If the outside dimensions are not 20 mm but way off, correct the settings for the affected axis
**_Bridging / cooling_**
If the bridging perimeters in the top center are drooping/sagging, check cooling an bridging settings in your slicer
45° overhangs
If the perimeters in this section are drooping/sagging, check the part cooling and cooling settings in your slicer
**_Speed / accelleration_**
ringing, bulged corners - you may want to reduce speed and/or accelleration (also see Preassure advance / linear advance)
**_First layer / bed adhesion_**
If there are problems with the print adhering to the bed, check if
- the bed is level and parallel to the x-axis
- the bed is clean - no dirt or grease
- the bed temperature is correct
If the print is wider at the bottom (first few layers) than at the top, check your z-offset and first layer settings
**_Retraction (stringing test)_**
If you experience stringing, check your retraction and cooling settings
**_Preassure advance / linear advance_**
If large seam gaps or bulged corners appear, consider tuning your printer firmware settings for preassure advance (Marlin) / linear advance (Klipper)

XYZ Calibration Test

I Love 3D Printing Gag Gift Mug

Clogged nozzles, layer shifts, poor layer adhesion… anyone familiar with 3D printing will recognize these!

See here for video: https://youtu.be/FJbw00gRW_4  

Are getting or giving a 3D printer this holiday season? This model is the perfect first print! Just hit print and walk away. Any flaws will only make it better!

3D designing and printing teaches us to expect mistakes, plan for them, fix them and try again. If you are new to 3D printing, you can expect to have more than a few prints that come out looking something like this mug.

Disclaimer: All flaws in this model are intended and don’t represent the quality of the brands shown! Lulzbot makes excellent printers and eSun makes excellent filament. Both are great options for avoiding the 3D printing pitfalls that you see in this print!


The Oh the Horror Cube

test print

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Ripple Benchy - Test Print

Xeno Benchy - Printer Calibration No Supports

Magnet Test

Bearded Gnome

Gridfinity Ikea Alex Drawer - Light Locking Base - 10x7 Grid

Escapement Demo FREE

FuzzyRing (Easy Print .3mf) - Fuzzy Skin Sample by RNDM3D

Calistar (formerly Fleur de Cali) - Open source printer size and skew calibration

12 Segment MMU12x Test Ring

View 11 new models

View 16 new models

View 14 new models

Testlement

Test Bridge

FabbEgg - The threaded surprise egg, that is easy to print, and SOOOOOO satisfying.

chess.stl

thangs valentine's day contest I heart benchy love lock

View 25 new models

I Love 3D Printing Gag Gift Mug

View 20 new models