Multiboard OctaPuller - Snap Removal Tool

MultiBoard-OctaPuller_Tool.stl

phone stand (print in place)

phone stand.STL

Chain + keyChains

CHAIN 1m.stl

Printed in place Flow POIs with a chain! 

2xOctoPOI.stl

EZPZ Keyring 1" BEEFY // Keychain Ring

EZPZ_ring_1in_BEEFY.stl

Triangle Bookend

EZPZ Pegboard Hook // 20mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 20mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 10mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Google Pixel 6A TPU BEEFCASE // MOO

6A_moo_B.stl

Google Pixel 6A TPU BEEFCASE // Blank

6A_blank.stl

Hex Shelf - Honeycomb Wall Shelf

Honeycomb Hex Wall - Larger & Stronger Hex Shelf 88x88

Hex Bin Gridfinity 1x4x4

Guitar Wall Mount Hanger with Flexible Top

60mm_Arm.stl

Tough Little Hook // Peg Anything

I made stronger hooks that use two pegs to prevent rotation. At 100% infill these little suckers can hold a fair amount of weight!

Made for standard pegboard with 1/4" holes spaced 1" apart. Photographed model printed with [MatterHacker White PRO Series PLA](https://bit.ly/PRO-PLA)

A Most Minimal Wall Hook

wallhook-body.STL

Peg Anything // Tough Large Hook

l-hook-sturdy.stl

HEAVY DUTY TPU Wall Mount

This is a unique one.  I wanted to wall mount this old tool storage unit.  As there was a folded lip on both the top and bottom, i designed these TPU hooks to hold the unit safely against the wall without touching it.  

IMPORTANT NOTE: I'm holding up nearly 80LBS when this is loaded.  (it has been safely holding for 12 months with no visible deformation.  The cabinet uses 4 mounts.)  I am using proper DECKING SCREWS, and using TPU 100% infill to ensure there are no layer delaminations or strength issues.

DISCLAIMER: I am not responsible for anything that happens if you use this model.  Wall mounting super heavy objects with 3D printed parts comes with real risks.  do NOT attempt this with any other types of filament, as they will certainly fracture under load.   

UMO+ feeder bowden clamp cap extra strength

Bowden clamp cap extra strength

Sliding Door Lock

strong

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Multiboard OctaPuller - Snap Removal Tool

phone stand (print in place)

Chain + keyChains

Printed in place Flow POIs with a chain!

EZPZ Keyring 1" BEEFY // Keychain Ring

View 24 new models

EZPZ Pegboard Hook // 20mm Hook Type B

EZPZ Pegboard Hook // 10mm Hook Type B

Google Pixel 6A TPU BEEFCASE // MOO

View 17 new models

Hex Shelf - Honeycomb Wall Shelf

Hex Bin Gridfinity 1x4x4

View 18 new models

View 20 new models

View 66 new models

View 111 new models

View 14 new models

UMO+ feeder bowden clamp cap extra strength

Sliding Door Lock