Astrolabicon Puzzle // Ripple

astrolabicon-ripple.stl

The Fidget Sphere

Fidget_sphere_top.stl

Astrolabicon Pro Classic

astrolabicon-classic.stl

Donut Factory Puzzle (Deconstructed) // 2x2 Twisty Marble Puzzle (24mm inner cube)

What's better than a donut? _SIX donuts!_

---

There's a lot going on in the Donut Factory. Twisting, spinning, snapping... the feel is satisfying, but trying to solve this tricky puzzle might leave you frustrated!

This 'Deconstructed' version is the same as the original, but with a sleek, refined exterior

---

**_Assembly_**

This puzzle is built around a tiny [24mm 2x2x2 puzzle cube](https://speedcubeshop.com/products/eastsheen-mini-2x2-keychain-cube?variant=40210339659889). You will have to remove the keychain part.

Print 8 copies of the included STL. No supports are required, but the overhangs may warp a bit on some printers, so you may want to include a wide brim and increase Z-retraction height for travel moves in your slicer settings.

After printing, use flush cutters to remove the brim and flat bottom.

Magnets are optional, but highly recommended since they improve the puzzle action and make assembly easier as well. You will need 48 3mm x 6mm neodymium magnets. I used E6000 adhesive to glue them into place. Each face has 2 magnets. Make sure the left holes all have the same polarity, and the right holes all have the opposite polarity. Also make sure the magnets are flush to the face. It can help to use the corner of a table or some tool to press the magnets into place. Allow the glue to dry before moving forward.

Next, glue 7 of the 8 sections onto the internal 2x2 cube. Use only enough adhesive to connect the print to the corner of a cube. If too much glue smushes out, your puzzle may not rotate!

Once the 7 parts are in place, load up the marbles. This puzzle was designed for use with these 14mm ABS no hole beads (true dimensions closer to 13.6mm). The easier way to add the marbles is to rotate individual halves 22.5 degrees so the tracks form an S-bend, so you can add all the marbles of one color (8 marbles per ring). Watching my assembly video might make this easier to understand!

After loading the 3 rings opposite of the missing piece, fill the top rings, including the final corner, and then glue that into place. 

The magnets will help hold the parts together while drying, but I like using [0.25" x 4" Grifiti Silicone Bands](https://amzn.to/45QcKz6) to compress the parts as well.

Once the glue is dry, you can remove the bands, and give the puzzles some good twists to rub off any excess E6000 between the faces.

That's it. The Donut Factory is complete!

---

**_Sources for Non-printed Parts_**

**24mm 2x2x2 Cube**
- [Eastsheen Mini 2x2 Keychain Cube](https://speedcubeshop.com/products/eastsheen-mini-2x2-keychain-cube?variant=40210339659889)

**14mm no hole ABS beads**
- [eBay](http://bit.ly/PuzzleBeads)

**or these Chinese Checkers Beads on**
- [Amazon](https://amzn.to/3byXlsV)

**6mmx3mm Neodymium magnets**
- [eBay N52](https://ebay.to/3kMB1A4)*
- [eBay N35](https://ebay.us/iHdF18)
- [Amazon](https://amzn.to/3Qtm6f6)

*Since this puzzle uses so many magnets the N35 strength ones are sufficient. N52 might be slightly overkill and pricey

**E6000 Craft Adhesive**
- [Amazon](https://amzn.to/3OHX22J)

**Silicone Bands for Assembly**
- [0.25" x 4" Grifiti Silicone Bands](https://amzn.to/45QcKz6)

---

_Alright, get to work. These donuts aren't going to make themselves!_ Enjoy :)

KWOB Puzzle // Retro

kwob-retro.stl

Palword Pal Sphere - Magnetic Closing/Opening Top

Pal Sphere AMS.stl

Lil Astro Puzzle // Orb

Lil Astro Orb.stl

MELTING CHRISTMAS BALL / UNIQUE CHRISTMAS DECOR / HOMEDECOR / DESIGNER

MELTING CHRISTMAS BALL.stl

Abstract Mother and Child.stl

Here's my last gift for you guys for this year's Mother's Day ☺️

I wanted to create something a bit different for this model.
So I thought...why not trying making an abstract sculpture?

Something that could be elegant and classic, but also that represents the warmth and love of a mother for her child.

Hope you will enjoy printing this statue 🥰
⸻⸻⸻⸻⸻⸻⸻⸻
𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :

🔸 3D Printer: Fokoos Odin-5 F3
🔸 Nozzle: 0.4 mm
🔸 Slicer: Ultimaker Cura 4.13.1
🔸 Layer height: 0.2 mm (3 walls thickness; 8 top / 3 bottom layers)
🔸 Infill : 10%
🔸 NO Support
🔸 Printing Temperature: 212°C / Build Plate Temperature: 60°C
🔸 Print speed: 50 mm/sec | Outer Wall Speed: 25 mm/sec
🔸 Filament: Marble PLA by SUNLU
🔸Size: 9,8 x 7,2 x 12,4 cm (X,Y,Z)
⸻⸻⸻⸻⸻⸻⸻⸻
Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)
⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻
**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here:_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻
𝗣𝗔𝗧𝗥𝗘𝗢𝗡 : https://www.patreon.com/RandomizY

𝗜𝗡𝗦𝗧𝗔𝗚𝗥𝗔𝗠 : https://www.instagram.com/randomizy.3d/

𝗖𝗵𝗲𝗰𝗸 𝗠𝗼𝗿𝗲 𝗛𝗲𝗿𝗲 : https://linktr.ee/RandomizY

Abstract Mother's Day Statue.stl

Abstract Mother's Day Statue (V1) [White PETG]

Abstract Mother's Day Statue (V2) [White PETG]

Sphere Puzzle nr 2

Sphere_puzzle_ball_level_2_piece_1.stl

Sphere Puzzle Nr 5

Sphere_Ball_puzzle_5_piece_nr_1.stl

Sphere Maze Level 1

SphereMaze_Level1_top_part.stl

Sphere Puzzle nr 3

Sphere_puzzle_ball_level_3_piece_9.stl

Sphere Puzzle nr 4

Sphere_puzzle_nr4_piece_nr_1.stl

the CHAIN puzzle // Grid

theChain_grid_A.stl

KWOB Puzzle // Frame

Kwob_Frame.stl

Astrolabicon Puzzle // Flux

astrolabicon-flux.stl

Lil Astro Puzzle // Groove

Lil Astro Groove.stl

Vortex Balance Sphere fidget spinner

Vortex_sphere_Sphere.stl

Star Wars Death Star – 3D Printed Lamp, Money Box, or Decoration (200 mm Sphere)

sphere_upper.step

sphere

Most Popular Paid of All Time

Categories

Paid

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Astrolabicon Puzzle // Ripple

The Fidget Sphere

Astrolabicon Pro Classic

Donut Factory Puzzle (Deconstructed) // 2x2 Twisty Marble Puzzle (24mm inner cube)

KWOB Puzzle // Retro

Palword Pal Sphere - Magnetic Closing/Opening Top

Lil Astro Puzzle // Orb

MELTING CHRISTMAS BALL / UNIQUE CHRISTMAS DECOR / HOMEDECOR / DESIGNER

Abstract Mother and Child.stl

Sphere Puzzle nr 2

Sphere Puzzle Nr 5

Sphere Maze Level 1

Sphere Puzzle nr 3

Sphere Puzzle nr 4

the CHAIN puzzle // Grid

KWOB Puzzle // Frame

Astrolabicon Puzzle // Flux

Lil Astro Puzzle // Groove

Vortex Balance Sphere fidget spinner

Star Wars Death Star – 3D Printed Lamp, Money Box, or Decoration (200 mm Sphere)