Give your [IKEA VAPPEBY](https://www.ikea.com/se/en/p/vappeby-bluetooth-speaker-white-gen-3-80517377/) Gen3 Speaker a sophisticated transformation with this GRID kit. This download includes the pictured Cover, Volume Dial (+ Bonus Studio Dial), and Grid Handle. (The power button can be downloaded seperately [here](https://than.gs/m/1274542?affiliateCode=MAKE))

---

**_Printing Guidelines_**

**Handle:**
- 0.16 mm layer height
- 4+ walls, 15%+ infill (use your discretion to make a strong part depending on the filament you use)
- No supports required

**Volume Dial and Cover:**
- 0.16mm layer height
- 2 walls, 15% infill
- No supports required
- For the Volume Dial, start with an opaque filament, and swap to a transparent filament above 2.4mm if you want the sides to light up (I also did a few layers of Black between the white and green to block more light from the front)*

          *For the Studio Dial, start with an opaque filament, and swap to a transparent filament above 8mm (at Z height 11mm if you want it to line up with the cover)

---

**_Assembly_**

**Handle:**
- Use the original screws for the stock VAPPEBY handle to connect this part
- Do not overtighten the 3D printed screw. That will cause the layers to be ripped apart.

**Cover:**
- Print four of the cover pins. Connect them to the back corners of the cover with a 1/4 twist clockwise (You can use pliers if the fit is tight).
- Cover should press fit into the existing rubber holes on the speaker.

**Studio Dial:**
- Optionally print the 'Studio Dial_Indicator' in another color and glue it into the divot on the Dial for an orbiting indicator (the orange dot shown in the photos).

_Feel free to leave a comment if you have any questions!_

---

**Filaments Used in Photos:**
- [Elegoo Rapid PLA+ White and Black](https://shrsl.com/4vqfx) (Also on [Amazon](https://amzn.to/4iioPSQ))
- [Bambu PETG Translucent 'Olive Green'](https://shrsl.com/4vz09)

**Printer Used:**
- [Qidi Plus4 3D Printer](https://qidi3d.com/products/plus4-3d-printer?sca_ref=6089281.BQS8d0sJuF) (Also [on Amazon](https://amzn.to/4jON7VK)) 

*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_*. 

IKEA VAPPEBY GRID Kit // Cover, Volume Dial, and Handle

VAPPEBY_Cover_Grid.stl

The **Momentus Mind Camera** is a breakthrough device capable of capturing vivid memories and storing them directly in your brain. The incredibly satisfying and effective clicking noise triggers a Pavlovian response that your brain will come to associate with important memories. Made possible by navigating a narrow labyrinth of legal loopholes, you can now 3D print your own! So get out there and make some memories (at your own risk)!

This is the **PRO Kit**, which includes a bunch of styles and options for your custom mind camera. Try out a basic kit [for free here](https://than.gs/m/1076063?affiliateCode=MAKE).

---

**_Printing Guidelines_**

_Watch the attached assembly video for detailed printing and assembly instructions!_

- 0.4mm nozzle, 0.16mm layer height, 3 walls, 10% infill, 5 top and bottom layers.
- All parts were designed to work with PLA, and should hold up for hundreds of snaps but a more resiliant material like PETG or ABS may increase shutter life. I would avoid softer PLA variants like silk/matte, especially for the Trigger. As always keep PLA parts out of hot environments.
- _Front_loose.stl_ part is included to compensate for imperfect prints, but it's highly suggested to use a tuned printer that works with the default parts for best operation.
- If using a softer filament or want an extra finger workout you can print the _'firm'_ and _'stiff'_ versions of the Trigger, but the standard one should work well for most cases.
- For the multicolor version of the back, make sure to use the correspondening strap type (_'noStrap','StrapA', or 'StrapB'_) for both the _face_ and _main_ STLs.

- Designed to work with my printable [Keychain Loop](https://than.gs/m/1076066?affiliateCode=MAKE) or any [standard keychain](https://amzn.to/4bGq5wJ).
- No adhesives should be necessary, but if you want to glue parts together for extra strength, I suggest [E6000](https://amzn.to/3UIOdso).

---

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab PLA](https://bit.ly/bamFIL).*


*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_*. 

sound

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

IKEA VAPPEBY GRID Kit // Cover, Volume Dial, and Handle

Momentus Mind Camera PRO // Fidget Clicker + Memory Device