Get commercial license and download newest models cheaply- https://www.patreon.com/c/goodesign

The spacecraft designed this time is SLS -Space launch system Block 1, which launched Artemis 1.
This rocket is an item that has been requested by many customers.

The assembly process is very simple, but please align before assembling to prevent wrong joint.

If the Solid Rocket Booster on both sides is connected incorrectly, the upper and lower parts may not match, so please check beforehand.
The Solid Rocket Booster and Core stage parts need to be glued together to make them strong.

The X-shaped frame of the interim cryogenic propulsion stage is folded and connected. Be sure to check the position before gluing.

The device connecting the solid rocket booster and the core stage should be connected with the bottom facing downward.

The solar panel of the Orion capsule is connected by exchanging the folded and unfolded ones, so you can replace them as needed.
The folded solar panel can be folded and attached using adhesive.
The unfolded solar panel has a hinge, so it can express a slightly folded state.

When connecting Solid Rocket Booster and Core stage, check the shape and location of the hole at the bottom before connecting.

Please refer to the video for detailed process.

https://youtu.be/QPSA_lYdnKc?si=HVKfpgh5btnpTHsd

It is hoped that Artemis 1's mission will be successful and humans will be able to go to the moon again.

1 : 144 scale

Largest part in printing, size = X 199mm, Y 194mm, Z 199mm, After full assembly size= X 135mm, Y 68mm, Z 682mm

Total Build Time : 119h 05m / Plastic Weight : 474.6g
Design by GOODesign

sls

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

SLS Space Launch System Block 1