Illusion Vase Stand (30 mm opening)

This Illusion Vase Stand design is inspired by simplicity and art. It's designed to hold 30 mm glass vases to help you spruce up your home. 

Its symmetrical appeal holds a vial vase perfectly and can be used to showcase your favorite flowers on a table, shelf, or desk. 

It's perfect for enthusiasts wanting to add something special to their home. The design can be printed without supports in a horizontal position. 



Size: 6.8 x 4.8 x 12.8 cm
Print time: 3 - 6 hours 

Happy printing

3D printer settings

Nozzle size 0.4 mm 
Layer height 0.2 - 0.25 mm 
2 - 3 perimeters 
5 - 10% infill 
30 - 40 mm/s print speed
No supports needed
Orientation: horizontal

Sphere Planter Sweep (vase mode)

Sphere planter Sweep (shelled).stl

 Spiral Cylinder Plant pot, Vase Mode & Shelled 

Twisted Cylinder Planter by Slimprint Shelled.stl

Ribbed Pencil Travel Case (Threaded Lid) 

Base - Ribbed Pencil Organizer by Slimprint.stl

 Abstract Bowl Planter, Vase Mode & Shelled

Abstract Bowl Planter by Slimprint Shelled.stl

 Abstract Pencil Cup

Abstract Pencil Cup Slimprint (shelled).stl

 Curved Bowl Planter, (vase mode)

Curved Bowl Planter shelled by Slimprint.stl

 Sphere Planter Zigzag (vase mode) 

Sphere planter zigzag by Slimprint (shelled).stl

 Minimalist Tape Dispenser (desk organizer) 

A simple, minimalist tape dispenser designed for general-purpose double-sided and regular painting/plastic tapes. 

Just orient the object flat on its back and start printing (without supports). 

I recommend printing the object with the variable layer height setting enabled in PrusaSlicer to ensure the teeth are sharp. In some cases, it also helps to insert the tape with the sticky side up for easier dispensing.

Size: 6.7 x 6.7 x 3 cm
Print time: 3 - 4 hours 

Settings:

Layer height: 0.25 mm (with adaptive variable layer height enabled @ 100% quality)
Perimeters: 2 - 3 
Infill: 10%
Top and bottom layers: 5

This is a fun/ experimental design. 
Any tips for improvement or feedback would be appreciated :)

Happy printing! 

Pencil Display Stand 3pc

A 3D printable display for organizing your pencils and markers and tidying up your desk. It has three holes and is quick and easy to print.

Orient the object sideways to print it without the need for support material.

Size:11.6 x 6.1 x 2.7 cm
Weight: 20 - 45 grams
Print time: 2 - 4 hours

Happy printing

Non-commercial use only.

Nozzle: 0.4mm
Layer height: 0.2 - 0.3 mm
Layer thickness: 0.4mm
2-3 perimeters - 5-10% infill
30 - 40 mm/s print speed
Print orientation: sideways

Honeycomb Planter

A 3D Printable Honeycomb Planter.

Print time: 4.5 - 5.5 hours
Size: 9.5 x 6.6 cm (diameter x height)
Weight: 65 grams

If you have questions, please let me know. I am happy to help.

Happy printing 

3D printing settings

0.25mm layer height
0.6mm layer width / wall thickness
2 walls - 10% infill
40mm/sec print speed - 120mm/sec travel


 Desk Organizer Set, Twisted & Zigzag Pencil Cups | Vase Mode

Zigzag Pencil Cup by Slimprint.3mf

 Twisted Pencil Cup

Twisted Pencil Holder by Slimprint.3mf

Diamond Pencil Holder & Memo box set

Diamond Pencil Holder by Slimprint.stl

Diamond memo box

A memo storage box with a diamond texture. Great for keeping your desk organized. 

Print time: 4 - 6 hours at 100% scale (depending on settings)
Dimensions: 9.5 x 9.5 x 7 cm (length x width x height)

Happy printing

3D printer settings

Nozzle: 0.4 mm
Layer height: 0.2 - 0.3 mm 
2 walls
5 - 10% infill
35 - 45 mm/s print speed

Tip: try calibrating your retraction settings before printing for the best results.

Honeycomb Pencil Holder 

A Pencil Holder with a honeycomb texture, designed in Fusion360.

Print time:5 - 7 hours at 100% scale (depending on settings)
Dimensions: 7 x 9 cm (diameter x height)
Weight: 42 grams

Tip: try to calibrate your retraction settings before printing for the best results.

If you have questions, feel free to contact me.

Happy printing

3D printer settings 

0.2 - 0.25mm layer height
0.35 – 0.4mm layer thickness
10% - 20% infill
45mm/sec print speed

PEN FLUTE, desk organizer

Is it a pen holder or a pan flute? Maybe both?

Organize your desk in style with a minimalist pen holder shaped like a pan flute. Its angled shape creates a sleek stepped texture at the top. Thanks to the five holes, you can easily keep your favorite pens or markers within reach. 

Feeling bored? Then you can also use it as a musical instrument. :p

Size: 9.4 x 2.2 x 10 cm 
Print time: 3 - 6 hours 

3D printer settings

0.4 mm nozzle
0.2 - 0.3 mm layer height
2 - 3 perimeters
5% infill
Speed: 30 - 45 mm/s

Happy printing

slimprint

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Illusion Vase Stand (30 mm opening)

Sphere Planter Sweep (vase mode)

Spiral Cylinder Plant pot, Vase Mode & Shelled

Ribbed Pencil Travel Case (Threaded Lid)

Abstract Bowl Planter, Vase Mode & Shelled

Abstract Pencil Cup

Curved Bowl Planter, (vase mode)

Sphere Planter Zigzag (vase mode)

Minimalist Tape Dispenser (desk organizer)

Pencil Display Stand 3pc

Honeycomb Planter

Desk Organizer Set, Twisted & Zigzag Pencil Cups | Vase Mode

Twisted Pencil Cup

Diamond Pencil Holder & Memo box set

Diamond memo box

Honeycomb Pencil Holder

PEN FLUTE, desk organizer

Angled Pencil Cup, Desk Organizer (Vase Mode)

Faceted Pencil Holder (Vase Mode)

Wavy Christmas Tree | Christmas Decor