SKEWBITS (v1) Puzzle Game for 3D Printing *OUTDATED*

Grid.stl

SKEWBITS // 001 (v1 OUTDATED)

This is problem 001 for my puzzle game [SKEWBITS!](https://thangs.com/designer/Make%20Anything/3d-model/949147?manualModelView=true&source=All+Files)

---

Fit the four puzzle pieces within this silhouette to achieve victory

---

**_Printing Guidelines_**
- Print solid, 2 perimeters

**NOTE:** The default orientation of this puzzle is to print upside-down (so any squash on the first layers doesn't affect fit). Make sure you orient correctly when playing the game! The puzzle number is embossed on the bottom side of each problem, make sure it's upright. You can use a filament swap or mark the bottom with [markers](https://amzn.to/3tLyRso) if you need to make things more clear.

---

The photographed model was printed using [RepRapper Modified PLA+ ](https://amzn.to/3HzEXQT)

SKEWBITS // 001

SKEWBITS // 002 (v1 *OUTDATED)

This is problem 002 for my puzzle game [SKEWBITS!](https://thangs.com/designer/Make%20Anything/3d-model/949147?manualModelView=true&source=All+Files)

---

Fit the four puzzle pieces within this silhouette to achieve victory

---

**_Printing Guidelines_**
- Print solid, 2 perimeters, 0.22mm layer height

**NOTE:** The default orientation of this puzzle is to print upside-down (so any squash on the first layers doesn't affect fit). Make sure you orient correctly when playing the game! The puzzle number is embossed on the bottom side of each problem, make sure it's upright. You can use a filament swap or mark the bottom with [markers](https://amzn.to/3tLyRso) if you need to make things more clear.

---

The photographed model was printed using [RepRapper Modified PLA+ ](https://amzn.to/3HzEXQT)

SKEWBITS // 002

SKEWBITS // 003 (v1 OUTDATED)

This is problem 003 for my puzzle game [SKEWBITS!](https://thangs.com/designer/Make%20Anything/3d-model/949147?manualModelView=true&source=All+Files)

---

Fit the four puzzle pieces within this silhouette to achieve victory

---

**_Printing Guidelines_**
- Print solid, 2 perimeters, 0.22mm layer height

**NOTE:** The default orientation of this puzzle is to print upside-down (so any squash on the first layers doesn't affect fit). Make sure you orient correctly when playing the game! The puzzle number is embossed on the bottom side of each problem, make sure it's upright. You can use a filament swap or mark the bottom with [markers](https://amzn.to/3tLyRso) if you need to make things more clear.

---

The photographed model was printed using [RepRapper Modified PLA+ ](https://amzn.to/3HzEXQT)

SKEWBITS // 003

SKEWBITS // 004 (v1 OUTDATED)

This is problem 004 for my puzzle game [SKEWBITS!](https://thangs.com/designer/Make%20Anything/3d-model/949147?manualModelView=true&source=All+Files)

---

Fit the four puzzle pieces within this silhouette to achieve victory

---

**_Printing Guidelines_**
- Print solid, 2 perimeters, 0.22mm layer height

**NOTE:** The default orientation of this puzzle is to print upside-down (so any squash on the first layers doesn't affect fit). Make sure you orient correctly when playing the game! The puzzle number is embossed on the bottom side of each problem, make sure it's upright. You can use a filament swap or mark the bottom with [markers](https://amzn.to/3tLyRso) if you need to make things more clear.

---

The photographed model was printed using [RepRapper Modified PLA+ ](https://amzn.to/3HzEXQT)

SKEWBITS // 004

SKEWBITS // 005 (v1 OUTDATED)

This is problem 005 for my puzzle game [SKEWBITS!](https://thangs.com/designer/Make%20Anything/3d-model/949147?manualModelView=true&source=All+Files)

---

Fit the four puzzle pieces within this silhouette to achieve victory

---

**_Printing Guidelines_**
- Print solid, 2 perimeters, 0.22mm layer height

**NOTE:** The default orientation of this puzzle is to print upside-down (so any squash on the first layers doesn't affect fit). Make sure you orient correctly when playing the game! The puzzle number is embossed on the bottom side of each problem, make sure it's upright. You can use a filament swap or mark the bottom with [markers](https://amzn.to/3tLyRso) if you need to make things more clear.

---

The photographed model was printed using [RepRapper Modified PLA+ ](https://amzn.to/3HzEXQT)

SKEWBITS // 005

SKEWBITS // 006 (v1 OUTDATED)

This is problem 006 for my puzzle game [SKEWBITS!](https://thangs.com/designer/Make%20Anything/3d-model/949147?manualModelView=true&source=All+Files)

---

Fit the four puzzle pieces within this silhouette to achieve victory

---

**_Printing Guidelines_**
- Print solid, 2 perimeters, 0.22mm layer height

**NOTE:** The default orientation of this puzzle is to print upside-down (so any squash on the first layers doesn't affect fit). Make sure you orient correctly when playing the game! The puzzle number is embossed on the bottom side of each problem, make sure it's upright. You can use a filament swap or mark the bottom with [markers](https://amzn.to/3tLyRso) if you need to make things more clear.

---

The photographed model was printed using [RepRapper Modified PLA+ ](https://amzn.to/3HzEXQT)

SKEWBITS // 006

SKEWBITS // 007 (v1 OUTDATED)

This is problem 007 for my puzzle game [SKEWBITS!](https://thangs.com/designer/Make%20Anything/3d-model/949147?manualModelView=true&source=All+Files)

---

Fit the four puzzle pieces within this silhouette to achieve victory

---

**_Printing Guidelines_**
- Print solid, 2 perimeters, 0.22mm layer height

**NOTE:** The default orientation of this puzzle is to print upside-down (so any squash on the first layers doesn't affect fit). Make sure you orient correctly when playing the game! The puzzle number is embossed on the bottom side of each problem, make sure it's upright. You can use a filament swap or mark the bottom with [markers](https://amzn.to/3tLyRso) if you need to make things more clear.

---

The photographed model was printed using [RepRapper Modified PLA+ ](https://amzn.to/3HzEXQT)

SKEWBITS // 007

SKEWBITS // 008 (v1 OUTDATED)

This is problem 008 for my puzzle game [SKEWBITS!](https://thangs.com/designer/Make%20Anything/3d-model/949147?manualModelView=true&source=All+Files)

---

Fit the four puzzle pieces within this silhouette to achieve victory

---

**_Printing Guidelines_**
- Print solid, 2 perimeters, 0.22mm layer height

**NOTE:** The default orientation of this puzzle is to print upside-down (so any squash on the first layers doesn't affect fit). Make sure you orient correctly when playing the game! The puzzle number is embossed on the bottom side of each problem, make sure it's upright. You can use a filament swap or mark the bottom with [markers](https://amzn.to/3tLyRso) if you need to make things more clear.

---

The photographed model was printed using [RepRapper Modified PLA+ ](https://amzn.to/3HzEXQT)

SKEWBITS // 008

SKEWBITS // 010 (v1 OUTDATED)

This is problem 010 for my puzzle game [SKEWBITS!](https://thangs.com/designer/Make%20Anything/3d-model/949147?manualModelView=true&source=All+Files)

---

Fit the four puzzle pieces within this silhouette to achieve victory

---

**_Printing Guidelines_**
- Print solid, 2 perimeters, 0.22mm layer height

**NOTE:** The default orientation of this puzzle is to print upside-down (so any squash on the first layers doesn't affect fit). Make sure you orient correctly when playing the game! The puzzle number is embossed on the bottom side of each problem, make sure it's upright. You can use a filament swap or mark the bottom with [markers](https://amzn.to/3tLyRso) if you need to make things more clear.

---

The photographed model was printed using [RepRapper Modified PLA+ ](https://amzn.to/3HzEXQT)

SKEWBITS // 010

SKEWBITS // 009 (v1 OUTDATED)

This is problem 009 for my puzzle game [SKEWBITS!](https://thangs.com/designer/Make%20Anything/3d-model/949147?manualModelView=true&source=All+Files)

---

Fit the four puzzle pieces within this silhouette to achieve victory

---

**_Printing Guidelines_**
- Print solid, 2 perimeters, 0.22mm layer height

**NOTE:** The default orientation of this puzzle is to print upside-down (so any squash on the first layers doesn't affect fit). Make sure you orient correctly when playing the game! The puzzle number is embossed on the bottom side of each problem, make sure it's upright. You can use a filament swap or mark the bottom with [markers](https://amzn.to/3tLyRso) if you need to make things more clear.

---

The photographed model was printed using [RepRapper Modified PLA+ ](https://amzn.to/3HzEXQT)

SKEWBITS // 009

SKEWBITS v2.0 Puzzle Game // Preview Set

bit_A_red.stl

SKEWBITS // 021-025 (v1 OUTDATED)

021.stl

SKEWBITS // 016-020 (v1 OUTDATED)

016.stl

SKEWBITS // 026 (v1 OUTDATED)

This is problem 026 for my puzzle game [SKEWBITS!](https://thangs.com/designer/Make%20Anything/3d-model/949147?manualModelView=true&source=All+Files)

---

Fit the four puzzle pieces within this silhouette to achieve victory

---

**_Printing Guidelines_**
- Print solid, 2 perimeters, 0.22mm layer height

**NOTE:** The default orientation of this puzzle is to print upside-down (so any squash on the first layers doesn't affect fit). Make sure you orient correctly when playing the game! The puzzle number is embossed on the bottom side of each problem, make sure it's upright. You can use a filament swap or mark the bottom with [markers](https://amzn.to/3tLyRso) if you need to make things more clear.

---

The photographed model was printed using [RepRapper Modified PLA+ ](https://amzn.to/3HzEXQT)

SKEWBITS // 026

SKEWBITS // 027

This is problem 027 for my puzzle game [SKEWBITS!](https://thangs.com/designer/Make%20Anything/3d-model/949147?manualModelView=true&source=All+Files)

---

Fit the four puzzle pieces within this silhouette to achieve victory

---

**_Printing Guidelines_**
- Print solid, 2 perimeters, 0.22mm layer height

**NOTE:** The default orientation of this puzzle is to print upside-down (so any squash on the first layers doesn't affect fit). Make sure you orient correctly when playing the game! The puzzle number is embossed on the bottom side of each problem, make sure it's upright. You can use a filament swap or mark the bottom with [markers](https://amzn.to/3tLyRso) if you need to make things more clear.

---

The photographed model was printed using [RepRapper Modified PLA+ ](https://amzn.to/3HzEXQT)

SKEWBITS // 029

This is problem 029 for my puzzle game [SKEWBITS!](https://thangs.com/designer/Make%20Anything/3d-model/949147?manualModelView=true&source=All+Files)

---

Fit the four puzzle pieces within this silhouette to achieve victory

---

**_Printing Guidelines_**
- Print solid, 2 perimeters, 0.22mm layer height

**NOTE:** The default orientation of this puzzle is to print upside-down (so any squash on the first layers doesn't affect fit). Make sure you orient correctly when playing the game! The puzzle number is embossed on the bottom side of each problem, make sure it's upright. You can use a filament swap or mark the bottom with [markers](https://amzn.to/3tLyRso) if you need to make things more clear.

---

The photographed model was printed using [RepRapper Modified PLA+ ](https://amzn.to/3HzEXQT)

SKEWBITS // 030

This is problem 030 for my puzzle game [SKEWBITS!](https://thangs.com/designer/Make%20Anything/3d-model/949147?manualModelView=true&source=All+Files)

---

Fit the four puzzle pieces within this silhouette to achieve victory

---

**_Printing Guidelines_**
- Print solid, 2 perimeters, 0.22mm layer height

**NOTE:** The default orientation of this puzzle is to print upside-down (so any squash on the first layers doesn't affect fit). Make sure you orient correctly when playing the game! The puzzle number is embossed on the bottom side of each problem, make sure it's upright. You can use a filament swap or mark the bottom with [markers](https://amzn.to/3tLyRso) if you need to make things more clear.

---

The photographed model was printed using [RepRapper Modified PLA+ ](https://amzn.to/3HzEXQT)

SKEWBITS // 028

This is problem 028 for my puzzle game [SKEWBITS!](https://thangs.com/designer/Make%20Anything/3d-model/949147?manualModelView=true&source=All+Files)

---

Fit the four puzzle pieces within this silhouette to achieve victory

---

**_Printing Guidelines_**
- Print solid, 2 perimeters, 0.22mm layer height

**NOTE:** The default orientation of this puzzle is to print upside-down (so any squash on the first layers doesn't affect fit). Make sure you orient correctly when playing the game! The puzzle number is embossed on the bottom side of each problem, make sure it's upright. You can use a filament swap or mark the bottom with [markers](https://amzn.to/3tLyRso) if you need to make things more clear.

---

The photographed model was printed using [RepRapper Modified PLA+ ](https://amzn.to/3HzEXQT)

skewbits

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

SKEWBITS (v1) Puzzle Game for 3D Printing OUTDATED

SKEWBITS // 001 (v1 OUTDATED)

SKEWBITS // 002 (v1 *OUTDATED)

SKEWBITS // 003 (v1 OUTDATED)

SKEWBITS // 004 (v1 OUTDATED)

SKEWBITS // 005 (v1 OUTDATED)

SKEWBITS // 006 (v1 OUTDATED)

SKEWBITS // 007 (v1 OUTDATED)

SKEWBITS // 008 (v1 OUTDATED)

SKEWBITS // 010 (v1 OUTDATED)

SKEWBITS // 009 (v1 OUTDATED)

SKEWBITS v2.0 Puzzle Game // Preview Set

SKEWBITS // 021-025 (v1 OUTDATED)

SKEWBITS // 016-020 (v1 OUTDATED)

SKEWBITS // 026 (v1 OUTDATED)

SKEWBITS // 027

SKEWBITS // 029

SKEWBITS // 030

SKEWBITS // 028

SKEWBITS // Solid Version Alternate Bits