Poo Emoji - Print in Place Articulating Book Stash Container that locks

Book Print in Place Box - Poop Emoji v2.stl

3rd Gen Tacoma Switch Panel for AuxBeam panel

This is a work in progress - not yet printed to verify fit.

Gridfinity Actually Good SD Card Holder

All the other Gridfinity SD card holders I could find were no buneo.  This one is bueno.

Gridfinity Holder for Snapmaker CNC clamps.stl

A tidy place to keep your clamps and screws for the Snapmaker's CNC functionality.

Snapmaker Clamp holder for Gridfinity.stl

GridFinity hexagonal bit module (4mm & 1/4")

bitstorage_1x1x6.35.stl

Gridfinity Simple Large Storage Bins

Gridfinity Simple Storage Bin 1C.stl

#gridfinity Vase Mode Single Box with Finger Curve & Magnets

I took LittleHobbyShop's vase mode single box a few steps further, and added the "finger scoop" curve from the original bins, as well as the ability to add magnets to the bottom.

Gridfinity Bottle Holder 50ml w/Brush

We all love our Vision Miner 50ml Nano Polymer from MatterHackers, or maybe you vape!  Perfect bottle fit, gridfinity and  style.

Gridfinity Bottle Holder 50ml

gridfinity ca glue holder

gridfinity ca glue holder.stl

Gridfinity - 4x18650 Holder 2x1x3

I made a battery holder using the templates from Zack Freeman: [Video Here](https://www.youtube.com/watch?v=ra_9zU-mnl8)

**Gridfinity Tips!**

    No brims or support required!
    Use any filament with an 0.6mm or smaller nozzle.
    Wider bins can curl, so maximize your bed adhesion if you're going big!
    All storage blocks are compatible with all baseplates!
    Most storage blocks are stackable!
    You can add 6x2mm magnets to the corners! They won't magnetize the contents.
    You can also use M3 screws in the corners.


Suspended Butterfly Art (single colour files)

Butterfly Mural Box4.stl

Raw Beskar Ingot (Mandolorian)

This can be printed in Resin or FDM (Better on Resin). No supports needed. Current scale is what I believe to be close to showing accuracy, but scale as you please!  The "demascus" pattern may become more pronounced the large the model is scaled. If printing on FDM, I printed with the small button face on the build plate and it worked fine (Should already be oriented this way)!  For resin, you may know how to orient it better than I do!

**Here Are the Settings I Used to Print:**
Nozzle: I printed with 0.4 with no issues, although a smaller nozzle or smaller layer height would probably make it look better on FDM.
Infill/Perimeters: On resin I printed hollow, on FDM I printed with 10% infill.
Supports: None

**Post-Processing/Assembly:**
I tried a couple of different methods for post-processing between silver rub n buff, and different black and silver paint to try and achieve the steel look.  The best in my opinion was the Resin print, painted with black spray paint, then given a light coat of silver acrylic paint.

**Future Plans/Other Notes**
I would eventually like to design a more show-accurate version as far as the pattern goes, although I am pretty happy with this one.  I may also experiment with the pattern depth to make it still highly visible, but less "textured."  Let me know what you think of the current design!

Girdifinity 9 Volt Battery Holder

Holds 5 standard 9 volt batteries in a 2x1 grdfinity slot.

The slots of the batteries are designed to fit the largest allowed size for 9 volts, so they likely fit your batteries loosley.

Cute Planter Tim Vase Mode

Hey,
this is Tim.Tim will take good care of your plants.

Print upside down with supports.

Cute Planter Tim

Printception Square Container

square-dish.stl

Gridfinity Basic Bin 2 sections

A basic 1x1 Bin (flat bottomed, split into 2 sections) for the Gridfinity system.

Gridfinity Philips One Blade Replacement Blade Holder.stl

Gridfinity holder for 3 philips one blade replacement blades

Desk Clamp with Gridfinity Top

desk_clamp_with_gridfinity_top.blend

Gridfinity Xbox controller S/X stand

A 4x2 gridfinity stand for xbox controller series S or X.
It can also store extra AA batteries or li-on batterie.

GAMER HEADSET HOOK HOLDER

GAMER HEADSET HOOK HOLDER FOR DESK STAND:

✅ Easy to install (use double-sided adhesive tape, not included).
✅ Store your headset elegantly on the wall or other smooth surface.
✅ Protect it from dirt, dust and clutter on a smooth base.
✅ Ideal material for printing: ABS or TPU (ABS is recommended as it is more resistant).
✅ In order for the backing to adhere well to the surface, it must be cleaned and dried where you want to stick it. After being glued, it should be left to stand for 3 minutes for a good adhesion of the product.

APPROX. DIMENSIONS:

✅ Length: 10 cm
✅ Width: 4.6 cm
✅ Height: 6.3 cm

TERMS OF USE:

FOR WEB & PRINT:

- Personal Use is OK.
- For Commercial / Promotional use is OK but you must include:

The link to my profile "piazzestudio" of Thangs on any product pages online.

- If you sell this product personally you must put also the credit of the creator.

Copyright remains with me.

❌Do not claim this work as your own.

My designs are ideals for gifts, home decoration, events plans, partys, weddings, etc.

I hope you enjoy my Work.

---------------------------------------------------------

CONDICIONES DE USO:

PARA WEB ó IMRIMIR:

- Para uso personal está bien.
- Para uso comercial / promocional está bien, pero debes incluir:

El enlace a mi perfil "piazzestudio" de Thangs en cualquier página de productos en línea.

- Si vendes este producto personalmente también debes indicar los créditos adecuados.

Los derechos de autor permanecen conmigo.

❌No reclames este trabajo como tuyo.

Mis diseños son ideales para regalos, decoración del hogar, planificación de eventos, fiestas, bodas, adornos, etc.

Espero que disfrutes de mi trabajo.

rectangle

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Poo Emoji - Print in Place Articulating Book Stash Container that locks

3rd Gen Tacoma Switch Panel for AuxBeam panel

Gridfinity Actually Good SD Card Holder

Gridfinity Holder for Snapmaker CNC clamps.stl

GridFinity hexagonal bit module (4mm & 1/4")

Gridfinity Simple Large Storage Bins

#gridfinity Vase Mode Single Box with Finger Curve & Magnets

Gridfinity Bottle Holder 50ml w/Brush

gridfinity ca glue holder

Gridfinity - 4x18650 Holder 2x1x3

Suspended Butterfly Art (single colour files)

Raw Beskar Ingot (Mandolorian)

Girdifinity 9 Volt Battery Holder

Cute Planter Tim Vase Mode

Printception Square Container

Gridfinity Basic Bin 2 sections

Gridfinity Philips One Blade Replacement Blade Holder.stl

Desk Clamp with Gridfinity Top

Gridfinity Xbox controller S/X stand

GAMER HEADSET HOOK HOLDER