#69 Pulley GT2 3D Print CNC | Fusion 360 | Pistacchio Graphic

Pulley GT2 v3.step

16 Teeth Pulley

Pulley__Small__Version.SLDPRT

Simon's Parametric Pulley Wheels for 608RS Bearings

22mm Bearing Pulley Generator - Generated Pully Wheel.3mf

20 Teeth Pulley

Pulley__Bigger__Version.SLDPRT

Simple Sturdy Pulley

pulley-sidea.stl

LilWinch

InLineWinch_v1 - WormGear.stl

Lil Winch V2

InLineWinch_v2 - WormGear.stl

Pulley | Umlenkrolle

Gehaeuse.stl

Modelling a V-Belt Pulley System with Fusion 360 | Pistacchio Graphic

base.stl

Filament Feeder System for Ender-3 V3 KE

Filament Pulley Mount.stl

Bambu Lab Filament pulley for carbon x1

Change the direction of the filament to guide it into the machine in a gentle way, placing the spool it a better orientation.

Recommended Material and settings:

PETG – dark color
Bottom and top layer 1.4mm 7 layers
5 layer wall thickness
Gryoid infill at least 15%
Plate: textured PEI plate with glue only on the parts for the calibration extrusions. No brim required.
Order of inner wall/ outer wall/ infill: infill, outside, inside or outside, infill, inside (i’ve switch to the former for most prints but I think I did particular machine with the later, I made this a few months ago and don’t remember, good luck)

Hardware Required
608 sized bearing
Super (cyanoacrylate) glue
1 Meter Bowden Tube

Assembly:
Press bearing into pulley, the glue flange over bearing – dark PETG colors glue better than light colors
Put assembled bearing onto spindle, place bracket over spindle and bracket locator, screw short screw into bracket locator – snug plus tightness is good enough

Insert new bowden tube into printer, the new tube only needs to be and inch or two longer, I recommend cutting it after you have the assembly somewhat located.

place assembly over filament spool holder, insert bowden tube into assembly, sticking out about an inch past it’s place of securing towards the pulley. Enough that the tube can flex a bit as the filament will move around a bit. 

Ensure the bowden tube is graceful in its curving into the machine (to test you can push filament through the tube to test it’s ease of insertion), once satisfied place the threaded block on the underside of the machine and the longer screw through the assembly into the block. Tighten snug plus.

If you don’t know how to use the device at this point you should now have profound feelings of everlasting shame and may whatever deity you worship have mercy upon your wretched soul. 


Other notes:

The bracket is strong enough to pull the bowden tube tight, pick up a full spool of tangled filament, the dry box it is in,  and all your frustrations at a failed print (I wouldn’t know, that’s just what a friend told me) without noticing. 

pulley

Trending this Week

Categories

Trending

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

#69 Pulley GT2 3D Print CNC | Fusion 360 | Pistacchio Graphic

16 Teeth Pulley

Simon's Parametric Pulley Wheels for 608RS Bearings

20 Teeth Pulley

Simple Sturdy Pulley

LilWinch

Lil Winch V2

Pulley | Umlenkrolle

Modelling a V-Belt Pulley System with Fusion 360 | Pistacchio Graphic

Filament Feeder System for Ender-3 V3 KE

Bambu Lab Filament pulley for carbon x1