WIRE NUT HITCH COVER; Swivel, moving, large wire nut hitch cover

Truck Nuts 2026.3mf

Plug, Dowel, Snap - Connectors

Plug, Dowel, Snap (0.10mm Tolerance) 1 Plate.stl

Witchcraft Poison Bottle

Bottle_Bambu_012mm.3mf

Profile End Cap 60×40×X mm – Simple Snap‑Fit Cover

Cap 60x40x2.stl

LAMP SHADE 2 / CLICK&PLUG (VASEMODE)

LAMP_SHADE_2.stl

Cfmoto Cforce Wheel Cap

cfmoto-wheel-cap-convex.stl

BMW i3 EV Charger Hanger

evse hlsterhngr+i3.stl

Spark Plug Rain and Wash Cap 

Spark_Cover.stl

1:12 Outlets and Light Switches

1_12 Classic Light Switch Cellar.stl

MultiBoard MAG-BOLTS

MultiBoard_MagBOLT_BigThread_FlatHead.stl

Cable Cradle

Assembly View Only (Do Not Print).3mf

J1772 EV Charger Cable & Plug Holder

J1772 Holder V1.11.stl

HDMI Plug

HDMIplug.stl

Plug and Socket Keychains

prongs.stl

Aux Headphone Jack Plug 3.5mm

For some reason the headphone jack on my HTC vive was giving me a slight electrical shock when resting on the back of my neck, so I made this little plug to cover it up. Perhaps it could also be used to keep dust out of aux jacks while not in use or for other purposes.

---

For some reason the headphone jack on my HTC vive was giving me a slight electrical shock when resting on the back of my neck, so I made this little plug to cover it up. Perhaps it could also be used to keep dust out of aux jacks while not in use or for other purposes.

----

Photographed model was printed with [MatterHackers Light Blue PRO Series PLA](https://bit.ly/PRO-PLA)

Printception Plug

Plug_Body.stl

Pegboard Anything // Just the Pegs (Fusion 360 link in description)

hard-peg.stl

Anderson plug holder.stl

**NO SUPPORTS NEEDED**
where I live people use Anderson plugs in the back of their Ute's (pick up trucks for the americans) for their off-Roading adventures. I made this model about a month ago and so far I've sold them at $15 each and made a total of about $650. just use 2 screws to attach it to a wall or other vertical surface and then slide in your Anderson plug (might need to force it in a few times before this process to make is clip in easier when mounting) this model is friction fit and with how tight it is, it has been way more than enough but if you feel the need you can use the built in screw holes that line up with the holes in the plug as well to screw it in for extra security. 
Good luck printing and enjoy!

Custom Plug CatSkull 64mm

Since buying custom plugs for my stretched ears costs way too much, i started to design my own. I print these in wood filament, at a layer height of 0.18. Check out my other ones too!

IKEA Atlant Sink Plug Seal

Replacement Seal for IKEA Atlant sink plug/strainer

The original seal for my IKEA Atlant kitchen sink plug broke - it wouldn't stay open any more due to the corners of the little standoffs being rubbed off by years of usage. As there where only a few clunky 3d models available online i decided to design my own version that prints without support structures.

Printing
Red TPU with a high shore hardness was used to print the part you see in the pictures.

Feedback
I would like to get your feedback on the part:

Does this part work for you?
What kind of material did you use (TPU, TPE, …) and which shore hardness does it have?
Are there any improvements to the model you would suggest?

plug

Trending this Week

Categories

Trending

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

WIRE NUT HITCH COVER; Swivel, moving, large wire nut hitch cover

Plug, Dowel, Snap - Connectors

Witchcraft Poison Bottle

Profile End Cap 60×40×X mm – Simple Snap‑Fit Cover

LAMP SHADE 2 / CLICK&PLUG (VASEMODE)

Cfmoto Cforce Wheel Cap

BMW i3 EV Charger Hanger

Spark Plug Rain and Wash Cap

1:12 Outlets and Light Switches

MultiBoard MAG-BOLTS

Cable Cradle

J1772 EV Charger Cable & Plug Holder

HDMI Plug

Plug and Socket Keychains

Aux Headphone Jack Plug 3.5mm

Printception Plug

Pegboard Anything // Just the Pegs (Fusion 360 link in description)

Anderson plug holder.stl

Custom Plug CatSkull 64mm

IKEA Atlant Sink Plug Seal